is this a good case for a n64p????
Moderator:Moderators
- clenteastwood
- Posts:43
- Joined:Fri Oct 12, 2007 7:49 am
- Location:a little town called six mile :)
http://www.polycase.com/item/ag-85.html also could some one give me a link to a good battery? (at least 3 to 4 hours of play time is what im loking for) thanks in advance!!!
- bacteria
- Portablizer Extraordinaire
- Posts:3984
- Joined:Fri Apr 20, 2007 12:14 am
- Location:Hampshire, UK
- Contact:
It will be a tight fit with an N64 board but you can trim off a few millimeters from the N64 board to reduce the size, so yes; the PSone screen is fine if you either relocate the top bit or do an LED mod. The downside of the case is that it is 44mm thick; this is too thick really. If the case were 30-32mm thick that would be ideal.
If you can get a case a few millimeters wider and longer it will save you a lot of grief. You should be ok using this case as it is thick, so you have space for wiring up a controller and memory card and expansion pack.
If you can get a case a few millimeters wider and longer it will save you a lot of grief. You should be ok using this case as it is thick, so you have space for wiring up a controller and memory card and expansion pack.
- clenteastwood
- Posts:43
- Joined:Fri Oct 12, 2007 7:49 am
- Location:a little town called six mile :)
- GoldenfrankO
- Posts:1490
- Joined:Sat Apr 19, 2008 7:40 pm
- PSN Username:FullFreak
- 360 GamerTag:GoldenfrankO