is this a good case for a n64p????

clenteastwood · Post by **clenteastwood** » Mon Mar 24, 2008 9:50 pm

http://www.polycase.com/item/ag-85.html also could some one give me a link to a good battery? (at least 3 to 4 hours of play time is what im loking for) thanks in advance!!!

bacteria · Post by **bacteria** » Tue Mar 25, 2008 2:49 am

It will be a tight fit with an N64 board but you can trim off a few millimeters from the N64 board to reduce the size, so yes; the PSone screen is fine if you either relocate the top bit or do an LED mod. The downside of the case is that it is 44mm thick; this is too thick really. If the case were 30-32mm thick that would be ideal.

If you can get a case a few millimeters wider and longer it will save you a lot of grief. You should be ok using this case as it is thick, so you have space for wiring up a controller and memory card and expansion pack.

clenteastwood · Post by **clenteastwood** » Tue Mar 25, 2008 1:47 pm

thanks man! i guess ill try to find a better one.

GoldenfrankO · Post by **GoldenfrankO** » Tue Apr 22, 2008 7:23 pm

I agree it's a bit small. If I were making one I'd use an old laptop.

bacteria · Post by **bacteria** » Wed Apr 23, 2008 2:35 am

Make your own case to suit what you need.