Help With Xbox Softmod
Moderator:Moderators
all else failed.
Plugged PSP into XBOX
Formatted PSP
Plugged PSP into PC
Started Xplorer360
Unzipped SID.Splinter.Cell.v2.0.PAL.Xbox-Hq.zip and SID.Splinter.Cell.v2.0.Xbox-Hq.zip to Desktop
Copied The UDATA folder to my PSP using Xplorer360
Plugged it into my Xbox
went to To Memory
Says it corrupted!
HELP!
Plugged PSP into XBOX
Formatted PSP
Plugged PSP into PC
Started Xplorer360
Unzipped SID.Splinter.Cell.v2.0.PAL.Xbox-Hq.zip and SID.Splinter.Cell.v2.0.Xbox-Hq.zip to Desktop
Copied The UDATA folder to my PSP using Xplorer360
Plugged it into my Xbox
went to To Memory
Says it corrupted!
HELP!
- BlackWaterOp
- Posts:168
- Joined:Wed Jan 03, 2007 10:09 am
- Location:Midland, MI
- Contact:
- lifeisbetterwithketchup
- Senior Member
- Posts:2180
- Joined:Fri Jul 21, 2006 12:08 pm
- Steam ID:lifeisbetterwithketchup
- Location:Illinois. Whee.
- Contact:
- joevennix
- Portablizer
- Posts:999
- Joined:Sat Jan 14, 2006 9:34 am
- Location:On permanent vacation from reality.
- Contact:
Yeah, it does. Sounds like a problem with the xplorer360 program.
This is what I did: Just install the ActionReplay software from CodeJunkies, use USBID to figure out the product and vendor IDs of the PSP flash drive, change them respectively in the ActionReplay's drivers folder, and reinstall the flash drive using ActionReplay's drivers. It'll recognize the drive and you can drag and drop your gamesave on to the drive. Then plug it into the xbox, find the drive, press left on the DPad, and copy it over. There's tut's all over the internet, just find one.
This is what I did: Just install the ActionReplay software from CodeJunkies, use USBID to figure out the product and vendor IDs of the PSP flash drive, change them respectively in the ActionReplay's drivers folder, and reinstall the flash drive using ActionReplay's drivers. It'll recognize the drive and you can drag and drop your gamesave on to the drive. Then plug it into the xbox, find the drive, press left on the DPad, and copy it over. There's tut's all over the internet, just find one.
- joevennix
- Portablizer
- Posts:999
- Joined:Sat Jan 14, 2006 9:34 am
- Location:On permanent vacation from reality.
- Contact:
It's not what dash you use, it's the BIOS you used to softmod. I'm not sure if there is a way to choose which dash to boot to, besides replacing the default.xbe, but that's kind of risky.paul4990 wrote:i got it working, but i have XBMC in E:\Apps\Xbmc
how do i use this as my default dash?
i have a choice between EvoX and UnleashX btw.
TIA
Paul
One thing you can do is you can flash the TSOP, I did this with my slimbox to keep it from hanging on boot without the DVD drive. You have to solder two easy points on the mobo for v1.0 - 1.1 boxes, there's a tutorial on the linux site. You then use Raincoat to flash it. It lets you change boot settings like the loading animation, sound, which dash to boot to, check for DVD drive, etc.
-
- Posts:1
- Joined:Tue Apr 17, 2007 11:09 pm
www.xbox-scene.com has all of this in there tutorials section plus an extensive forum group.