Polarized or Non-Polarized?
Moderator: Moderators
Polarized or Non-Polarized?
The caps that attach to the controller port. Are they polarized and if so which side is + and which side is - ? All I know is that the caps in the 2600 schematic are polarized...
-
JackFrost22
- Sir Posts-alot
- Posts: 4186
- Joined: Fri Jun 04, 2004 4:10 pm
-
SpongeBuell
- Senior Member
- Posts: 5190
- Joined: Wed Apr 07, 2004 10:52 am
- Location: Colorado
- Contact:
-
SpongeBuell
- Senior Member
- Posts: 5190
- Joined: Wed Apr 07, 2004 10:52 am
- Location: Colorado
- Contact:
-
JackFrost22
- Sir Posts-alot
- Posts: 4186
- Joined: Fri Jun 04, 2004 4:10 pm
-
SpongeBuell
- Senior Member
- Posts: 5190
- Joined: Wed Apr 07, 2004 10:52 am
- Location: Colorado
- Contact:
-
JackFrost22
- Sir Posts-alot
- Posts: 4186
- Joined: Fri Jun 04, 2004 4:10 pm
-
A. Nonamus
Symbols:
-||- is supposed to be a non-polar capacitor
-|]- and -|(- are both supposed to be polar (+ on the right as shown here, even if not marked with a "+")
BUT lots of people use them wrong, using the second and third versions without a "+" as non-polar. This is of course confusing - one possible way to tell what is what (if you can't tell from the capacitance value and circuit context) is: if on one drawing the same symbol is used for all caps, sometimes with "+" markings and sometimes without, if the creator didn't make a mistake, the ones without the "+" signs will all be non-polar.
-||- is supposed to be a non-polar capacitor
-|]- and -|(- are both supposed to be polar (+ on the right as shown here, even if not marked with a "+")
BUT lots of people use them wrong, using the second and third versions without a "+" as non-polar. This is of course confusing - one possible way to tell what is what (if you can't tell from the capacitance value and circuit context) is: if on one drawing the same symbol is used for all caps, sometimes with "+" markings and sometimes without, if the creator didn't make a mistake, the ones without the "+" signs will all be non-polar.
-
A. Nonamus