Could i cut it with an X-acto knife?
I mean i already know of some plastic i could use but if i could use acrylic in the same way then....
how hard is Acrylic to cut?
Moderator:Moderators
- MESAJARJARBINKS
- Posts:224
- Joined:Mon Jan 30, 2006 7:32 pm
- Location:where did i get the name "eclipse" ah well doesnt matter...
Steve irwin-died of stingray (WTH?)
R.I.P.
R.I.P.
- gamekid512
- Posts:15
- Joined:Mon Jul 03, 2006 3:33 pm
depends how thick it is.....if it is a thick board, NO WAY!!! Tried it for 5 minutes and didnt get anywhere. If its thin maybe, but do u have a dremel tool or something?
For God so loved the world he gave his only son and whoever believes in him (jesus) will not perish but have eternal life. john 3:16
-
- Portablizer
- Posts:482
- Joined:Thu Jul 27, 2006 2:15 am
- Location:UK
- Contact:
I used Dremel to do a rough cut and then a bench grinder to get a smooth edge and shape. Saws were useless and Jigsaws chipped it (depends on the blade you use of course)
gamemasterAS wrote:Solder is also bad for you, says on the spindal that its known to cause cancer in the state of California.
vskid wrote:I'm safe, I live in Utah.
- Life of Brian
- Moderator
- Posts:2867
- Joined:Wed Aug 03, 2005 5:55 pm
- Location:Oklahoma
- Contact:
- ShockSlayer
- Niblet 64
- Posts:5059
- Joined:Thu Jun 29, 2006 12:47 pm
- Location:In my inbox.
Hack saw jig saw bench saw saw saw saw saw. Thats my method.
http://twitter.com/ShockSlayer" onclick="window.open(this.href);return false;