SNESp Finished
Moderator:Moderators
- Mr. Hawkins
- Posts:61
- Joined:Sat Nov 12, 2005 7:32 pm
- Location:Way down South
Wellllll, its been awile since I've worked on this thing. Decided to finish it up before the summer kicks into high gear (work and all). Got the hole case put together now and the wiring is finished except for the controller ports to the controller board. This is what the top looks like
the top is made of an old clip board. I think that this is the best material ever! It is strong, lightweight, and thin (what more could a man ask for ). The rest of the case is a plastic drawer from my work table. When I'm finished I'll post more pics.
the top is made of an old clip board. I think that this is the best material ever! It is strong, lightweight, and thin (what more could a man ask for ). The rest of the case is a plastic drawer from my work table. When I'm finished I'll post more pics.
Last edited by Mr. Hawkins on Thu Jun 15, 2006 2:32 pm, edited 1 time in total.
- shmagoogin77
- Portablizer
- Posts:1469
- Joined:Sun Apr 17, 2005 6:10 pm
- Location:My desk
- Contact:
Sweet Idea for the material. I think that's what I will use to replace the cardboard on the back of my snesp. Can you cut that stuff with an xacto knife
<img src="http://img494.imageshack.us/img494/8505 ... .jpg"><img src="http://stuff.sonicenema.com/pickies/acceptchrist.jpg">
Do you want to be axepwned?
Do you want to be axepwned?
- Mr. Hawkins
- Posts:61
- Joined:Sat Nov 12, 2005 7:32 pm
- Location:Way down South
Sort of. You can score it and snap it off, but it is made like particle board, so it will break oddly. ideally you should use a dremel, but I used a hacksaw and an old jigsaw. Another note, make SURE to use a backing material and clamp it down when cutting into or drilling through a clip board. If you don't, the back side will flake away and turn out all crazy. If this does happen though, you can just sand it down.daleighan wrote: Can you cut that stuff with an xacto knife
Here is a pic of all of the electonics up an running. This weekend I will put the stuff into the case and will hopefully be done.
Sorry, my hands were not so steady that day
- shmagoogin77
- Portablizer
- Posts:1469
- Joined:Sun Apr 17, 2005 6:10 pm
- Location:My desk
- Contact:
- Mr. Hawkins
- Posts:61
- Joined:Sat Nov 12, 2005 7:32 pm
- Location:Way down South
- CronoTriggerfan
- Moderator
- Posts:4131
- Joined:Fri Jan 27, 2006 3:07 pm
- Location:University of Michigan - Ann Arbor
- Contact:
- Mr. Hawkins
- Posts:61
- Joined:Sat Nov 12, 2005 7:32 pm
- Location:Way down South
Already done.CronoTriggerfan wrote:Drop G-Force a line in the sticky so your SNESp can be in the database, right next to mine!
Here are more pics
http://img84.imageshack.us/img84/9858/dsc004234ag.jpg
http://img84.imageshack.us/img84/7294/dsc004269fo.jpg
http://img84.imageshack.us/img84/6103/dsc004272ov.jpg
- shmagoogin77
- Portablizer
- Posts:1469
- Joined:Sun Apr 17, 2005 6:10 pm
- Location:My desk
- Contact:
- cowsgoquack101
- Senior Member
- Posts:1981
- Joined:Thu Aug 04, 2005 9:21 am
- Steam ID:cowsgoquack101
- Location:Cold, grey Indiana!
- Contact:
- Mr. Hawkins
- Posts:61
- Joined:Sat Nov 12, 2005 7:32 pm
- Location:Way down South
- bioniclebert
- Posts:1287
- Joined:Sat Jul 23, 2005 11:04 am
- Location:Buffalo.
- Contact: