PSTwoSP -In Slow But Steady Progress-
Moderator:Moderators
- eastsider_1
- Posts:219
- Joined:Sat Jul 02, 2005 4:03 am
- Location:GA
- Contact:
I FINALLY saw segasonicfan' s PS2p video, man i am wholesomely amazed. Yeah i know it's a bit late, but damn!!!! Anyways i recently recieved a PSTwo and was amazed to pick it up and see how small it was. Sadly the thing isn't mine, but i think after i finish the PS2M, i definitely want to have something to that equivalent. I saw the the frankemodded case he had- not bad, but i said to myself "I could do better"- a better case that is . But i would LOVE to have the soldering ability of Segasonicfan, and some knowledge about the converter he used.
Last edited by eastsider_1 on Mon Sep 18, 2006 2:15 am, edited 3 times in total.
PS2M-99% -Final Stages of the 1st O.G. PS2 Portable (Will this ever get done??)
PSTwoSP- 50%
Rewiring Controller, LED Modding Screen
PSTwoSP- 50%
Rewiring Controller, LED Modding Screen
he posted a schematic of the DC-DC converter he used as in, he made it himself
Also I asked him about the schematic he used for the Small Power amps and it seems very simple
Just read up on it and find more info, it is you most powerful ally
One more thing, a decent Iron is one with a finely filed tip (flux doesn't hurt either, when applied with dentist precision swabs)
Also I asked him about the schematic he used for the Small Power amps and it seems very simple
Just read up on it and find more info, it is you most powerful ally
One more thing, a decent Iron is one with a finely filed tip (flux doesn't hurt either, when applied with dentist precision swabs)
I refuse to dignify myself with an intelligent and witty signature
- eastsider_1
- Posts:219
- Joined:Sat Jul 02, 2005 4:03 am
- Location:GA
- Contact:
i know he made the converter himself, im saying that i dont really know what all the little things do and how to read the scematic, i will buy a book at Radio Shack that lists the components and what they do.
PS2M-99% -Final Stages of the 1st O.G. PS2 Portable (Will this ever get done??)
PSTwoSP- 50%
Rewiring Controller, LED Modding Screen
PSTwoSP- 50%
Rewiring Controller, LED Modding Screen
- eastsider_1
- Posts:219
- Joined:Sat Jul 02, 2005 4:03 am
- Location:GA
- Contact:
Here's my concept:
There will be room for front mounted speakers, and the contoller grips will look like it going thru the PSTwo, and this will allow for ultimate comfort. A second fan will be installed, and some power jacks wiill be rewired for the li-ion battery mounted either on the inside or outside of the console. The screen will be able to fit further up on the PSTwo cause it will be led modded, and top of the screen PCB will be trimmed. The screen will be molded on top of the flip top, and rumble will remain intact. Any suggestions- a mod chip is a MUST. Im not trying to make it look like im copying Segasonicfan's, but he did a hell of a job- besides where he put everything is really the only place to put it.
There will be room for front mounted speakers, and the contoller grips will look like it going thru the PSTwo, and this will allow for ultimate comfort. A second fan will be installed, and some power jacks wiill be rewired for the li-ion battery mounted either on the inside or outside of the console. The screen will be able to fit further up on the PSTwo cause it will be led modded, and top of the screen PCB will be trimmed. The screen will be molded on top of the flip top, and rumble will remain intact. Any suggestions- a mod chip is a MUST. Im not trying to make it look like im copying Segasonicfan's, but he did a hell of a job- besides where he put everything is really the only place to put it.
PS2M-99% -Final Stages of the 1st O.G. PS2 Portable (Will this ever get done??)
PSTwoSP- 50%
Rewiring Controller, LED Modding Screen
PSTwoSP- 50%
Rewiring Controller, LED Modding Screen
- shmagoogin77
- Portablizer
- Posts:1469
- Joined:Sun Apr 17, 2005 6:10 pm
- Location:My desk
- Contact:
- eastsider_1
- Posts:219
- Joined:Sat Jul 02, 2005 4:03 am
- Location:GA
- Contact:
- eastsider_1
- Posts:219
- Joined:Sat Jul 02, 2005 4:03 am
- Location:GA
- Contact:
who cares about who thought about it and when. Oh yea im frankenmodding the case, bondo and epoxy are my 2 best friends- next to the gold paint. I've got enought to buy a slim now.
PS2M-99% -Final Stages of the 1st O.G. PS2 Portable (Will this ever get done??)
PSTwoSP- 50%
Rewiring Controller, LED Modding Screen
PSTwoSP- 50%
Rewiring Controller, LED Modding Screen
- CronoTriggerfan
- Moderator
- Posts:4131
- Joined:Fri Jan 27, 2006 3:07 pm
- Location:University of Michigan - Ann Arbor
- Contact:
- CronoTriggerfan
- Moderator
- Posts:4131
- Joined:Fri Jan 27, 2006 3:07 pm
- Location:University of Michigan - Ann Arbor
- Contact:
You could give your money to me. Please!!!!!!!!!!!!!!!CronoTriggerfan wrote: Only because I've got a lot of money right now and nothing to spend it on! And besides, I've got no time to tackle a PS2p right now....I've got some "other" portable related interests at the moment
And I think I'll be building my own N64p, and maybe something else....
CTFan
I'll sell you some really nice printer paper!
or possibly some guaranteed ways to win a darwin award!
or mabye you would prefer a custom made art supply storage container!
or I could cover your portable in some acrylic enamel (Car paint, I could give it a sweet EVH Paintjob)
I could sell you my entire collection of LEGOs! (Not really I am too attached)
or possibly some guaranteed ways to win a darwin award!
or mabye you would prefer a custom made art supply storage container!
or I could cover your portable in some acrylic enamel (Car paint, I could give it a sweet EVH Paintjob)
I could sell you my entire collection of LEGOs! (Not really I am too attached)
I refuse to dignify myself with an intelligent and witty signature
- shmagoogin77
- Portablizer
- Posts:1469
- Joined:Sun Apr 17, 2005 6:10 pm
- Location:My desk
- Contact: