Stupid Problem-Stripped Screws
Moderator:Moderators
- Mr. Bastey
- Posts:32
- Joined:Mon Mar 01, 2010 4:41 pm
Hello. Ever try opening a console or a controller or whatever, and the screw ends up stripping? Or sometimes, it'll already be stripped. Does anyone have any tips to get around this? I've searched online and all I've found were things about stripping large screws, not small screws used for electronics or whatever. Any advice?
- marshallh
- Moderator
- Posts:2986
- Joined:Sat Sep 10, 2005 2:17 pm
- 360 GamerTag:marshallh
- Location:here and there
- Contact:
Re: Stupid Problem-Stripped Screws
1. Drill out the screw
2. Roll a tube of wax paper around the screw, pour in 5min epoxy with welding rod or some other thick rod to unscrew it with
3. Impact driver with proper bit
2. Roll a tube of wax paper around the screw, pour in 5min epoxy with welding rod or some other thick rod to unscrew it with
3. Impact driver with proper bit