now ALL psps can be downgraded!

Want to just shoot the breeze? Forum 42 is the place!

Moderator:Moderators

Post Reply
Ari
Posts:104
Joined:Mon Jul 31, 2006 8:03 pm
now ALL psps can be downgraded!

Post by Ari » Mon Jan 29, 2007 2:27 pm

Noobz amazes us all yet again with a 3.03 downgrader! It works with all psps, regardless of current firmware or motherboard!
Noobz.eu wrote:v3.03 Downgrader

After much work over the past few days, we finally succeeded - we have an easy-to-use downgrader for v3.03 PSPs!

Some ground-rules:

* This downgrader is for v3.03 firmware only. But if you have v2.81 - v3.02, no problem - you can just upgrade to v3.03 to use the downgrader.
* You need a copy of the unpatched GTA:Liberty City Stories UMD. No ISOs, no patched UMDs, not Vice City Stories. See here for some info on how to check if your version is patched. The most reliable way : the unpatched disks have the v2.0 firmware update on them.
* This downgrader is intended to enable homebrew. Homebrew is NOT the same as piracy. Don't be a thieving loser - buy the games you play.
* The downgrader will work on all current PSP hardware (TA-079 - TA-086). Patching of TA-082+ is automatic in the downgrader.
* You downgrade at your own risk. There is always a chance of bricking, although we have done everything we can think of to make this process safe.

Full instructions for downgrading are included in the Downgrader_HOWTO.txt file in the ZIP file. Read them carefully! You will need:

* The 3.03 downgrader package
* Official v1.50 Firmware Update EBOOT
* Official v3.03 Firmware Update EBOOT (only if your PSP is not 3.03 already)

Enjoy! You can get support for any problems at the PSPUpdates forum.

Remember to check out the PSP Homebrew Database for information on homebrew that can be run on your newly-downgraded PSP!

Warning: After downgrading from 3.03 to 1.5, there are some remnants of 3.03 left in flash. If you later try to re-upgrade to 3.03 and repeat the downgrade, things will break. At some later point, we will work on a cleaner that will remove these extra files. Until then, enjoy! (Don't worry, upgrading to 3.03 OE firmwares still works fine).

Post Reply