nintendo ds
Moderator:Moderators
i have a freind who wants me to save a nintendo ds of his. his broke due to "difficulties" at school. AKA he got his top screen ripped off.
the cables going up into the screen ripped apart
is there a way to save it or should he just get a new one?
thanks
the cables going up into the screen ripped apart
is there a way to save it or should he just get a new one?
thanks
- bioniclebert
- Posts:1287
- Joined:Sat Jul 23, 2005 11:04 am
- Location:Buffalo.
- Contact:
- Triton
- Moderator
- Posts:7397
- Joined:Mon May 24, 2004 12:33 pm
- 360 GamerTag:triton199
- Steam ID:triton199
- Location:Iowa
- Contact:
he should ge me the broken one! lol if those little ribbon cables are ripped you can replace the top lcd or just the cable im pretty sure there are places you can buy replacement parts for not very cheap
Visit us at Portablesofdoom.org
You can buy top screens on Ebay or Xbox Repair Guide. Xbox Repair Guide is cheaper.
If you're talking about the cable that goes from the mainboard to the top PCB, he needs this.
If you're talking about the cable that goes from the mainboard to the top PCB, he needs this.
thanks
thanks thats exactly what i needed
one more thing there is a black wire going up to the top screen, what is it, is it a ground/important?
thanks
one more thing there is a black wire going up to the top screen, what is it, is it a ground/important?
thanks
- S q u e e !
- Posts:835
- Joined:Wed Feb 16, 2005 11:31 am
- Location:Lost. Are you my mommy?
Yes, it's the wifi antenna. Here is the full top PCB set along with the wire.S q u e e ! wrote:Yes. I believe it is for the WiFi antenna.
good
i ordererd the stuff i need it should be coming in 2-3 days
- collingall2005
- Posts:49
- Joined:Tue Aug 02, 2005 6:27 am
- Location:Earth
- Contact:
Good job. Have fun fixing it! It's really easy. To fix the DS. The only think that I could see being a problem is the Wifi cable (or the cable between the mainboard and the top board). You need to take the DS completely apart to change those.Zee100 wrote:the main board is o.k. i think and i didnt order the whole top screen just the cable as the screen is fine
also i managed to get the screws of using a very very small flat head screwdriver. it worked well. parts should come soon ill update when i get them
Fuse 1 (I think) might be blown, it's under the bottom screen. Check it to see if it's working using a multimeter. Does it turn on at all, like does the green light stay on? If the light doesn't stay on, then F2 is blown, and that one's next to the power plug. Check that one as well, then tell us which one.Zee100 wrote:he gave it to me to fix for the time being and it does this weird thing when you turn it on. the bottom scree(top not being atached) flashes and then it turn off. this is just because the top screen/antena are not hocked up right?
But that sounds more like Fuse 2, since the screen comes on then goes off.