Official BlackBox News Thread

Want to just shoot the breeze? Forum 42 is the place!

Moderator:Moderators

Post Reply
User avatar
blackbox_dev
Senior Member
Posts:1906
Joined:Sun Jan 15, 2006 5:19 pm
Location:Formerly known as iam7805

Post by blackbox_dev » Sat Jun 03, 2006 7:35 pm

@MM007: I can't really give out that information because I am not far enough in the design process. I do not want to give out any information that may turn out to be false. However, I can tell you that the sound processor is a seperate chip. Also, the way the controller works is quite simple (been redesigned and now only has three pins: 5v, vss, and data). All the data is sent as serial data from the controller to the console. The analog sticks are read using a simple ADC and are also sent in the same serial data (well, that was obvious. what other data line is it going to get sent in? lol)

Sorry that I can't answer all your questions right now. Well, I probably could, but I don't want to give out information that is going to change.

@Nick: I'm open to game concepts and designs. If something is good enough it might be considered and even made into a final game!

@Harshboy: You'd buy two!? Thanks man! Your a great guy. And yeah, i'm still designing schematics and even drawing up some shell designs in my spare time.
I'd imagine right now you wish you were a cuttlefish...

User avatar
Sword_Gun
Posts:1008
Joined:Sat Feb 25, 2006 10:31 pm
Location:Somewhere rapping with DeTsL
Contact:

Post by Sword_Gun » Sat Jun 03, 2006 7:47 pm

How much would they be?

and *cough* Give some free ones away.. maybe one to me *cough*

I have a bad cold
Image

Official Beta Quest Hunter
Official Alpha Quest Hunter

NES NOW!!: DONE!

Harshboy
Portablizer
Posts:3610
Joined:Tue Oct 11, 2005 3:44 pm

Post by Harshboy » Sat Jun 03, 2006 8:30 pm

Sword_Gun wrote:How much would they be?
Yes, as long as they are in moderation, i'll buy :D

User avatar
Sword_Gun
Posts:1008
Joined:Sat Feb 25, 2006 10:31 pm
Location:Somewhere rapping with DeTsL
Contact:

Post by Sword_Gun » Sat Jun 03, 2006 8:32 pm

I'd Buy, but I'm broke :(, Im sure its gonna be awsome though.
Image

Official Beta Quest Hunter
Official Alpha Quest Hunter

NES NOW!!: DONE!

User avatar
blackbox_dev
Senior Member
Posts:1906
Joined:Sun Jan 15, 2006 5:19 pm
Location:Formerly known as iam7805

Post by blackbox_dev » Sun Jun 04, 2006 8:24 am

If all goes acording to plan i'm hoping from:

100-200 USD
77-155 EUR
110-220 CAD


Currencies are converted for the countries of the people on the International BlackBox Team.
I'd imagine right now you wish you were a cuttlefish...

Harshboy
Portablizer
Posts:3610
Joined:Tue Oct 11, 2005 3:44 pm

Post by Harshboy » Sun Jun 04, 2006 9:03 am

Well, i might only be able to buy one if they're in the 100-200ish range. I need to save money for a Macbook and a GBA Flashcart for my GBA SP

jeroen
Senior Member
Posts:1573
Joined:Mon Oct 10, 2005 7:42 am
Location:The Netherlands

Post by jeroen » Sun Jun 04, 2006 9:13 am

Ok. Black Box forum has been created. Check it out at: http://blackbox.jconserv.net/index.php

Greetings,

The international Black Box team. :wink:

Edit: If the mods think this is advertising. Feel free too remove.

User avatar
MM007
Moderator
Posts:1175
Joined:Mon Apr 05, 2004 6:01 pm
Location:In the wilds of suburbia...
Contact:

Post by MM007 » Sun Jun 04, 2006 1:08 pm

iam7805 wrote:@MM007: I can't really give out that information because I am not far enough in the design process. I do not want to give out any information that may turn out to be false. However, I can tell you that the sound processor is a seperate chip. Also, the way the controller works is quite simple (been redesigned and now only has three pins: 5v, vss, and data). All the data is sent as serial data from the controller to the console. The analog sticks are read using a simple ADC and are also sent in the same serial data (well, that was obvious. what other data line is it going to get sent in? lol)

Sorry that I can't answer all your questions right now. Well, I probably could, but I don't want to give out information that is going to change.
Understandable, but I have to wonder if putting the signal through an ADC will make the analog less accurate, or is the ADC fine enough to make it unnoticable? I understand if this can't be answered right away though.
Warranty-Voiding fun!

Image

User avatar
Extreme_Jesus
Posts:1293
Joined:Sat Oct 01, 2005 12:04 pm
Location:Old Hampshire, none of that New hampshire stuff....

Post by Extreme_Jesus » Sun Jun 04, 2006 1:09 pm

then that would be 50-100 GBP*

which is not bad for a console

*based on rounded averages of currency conversions

User avatar
Skyone
Moderator
Posts:6390
Joined:Tue Nov 29, 2005 8:35 pm
Location:it is a mystery
Contact:

Post by Skyone » Sun Jun 04, 2006 1:42 pm

Seriously, I would only buy one for $20 USD. If I want an 8-BIT console I can buy a NES for 30 bucks, and that actually has good titles. As for open soure and homebrew, I can do homebrew on the NES, in fact, I have. $150 USD is in conclusion higher than an xbox, which is basically open source with a modchip. And it's graphics aren't 2D.

If you're actually serious about this, price it lower than $150. If this is a fundraiser, heh, good luck!

sammy
Posts:568
Joined:Thu Dec 08, 2005 3:13 pm

Post by sammy » Sun Jun 04, 2006 3:16 pm

How can they sell it at $20 if it costs more to make?

User avatar
Extreme_Jesus
Posts:1293
Joined:Sat Oct 01, 2005 12:04 pm
Location:Old Hampshire, none of that New hampshire stuff....

Post by Extreme_Jesus » Sun Jun 04, 2006 3:19 pm

they could, they'd just lose tons of money and it would make bussiness sense to do that

User avatar
Skyone
Moderator
Posts:6390
Joined:Tue Nov 29, 2005 8:35 pm
Location:it is a mystery
Contact:

Post by Skyone » Sun Jun 04, 2006 3:47 pm

Nah, but $50 would be reasonable. $10 a game.

User avatar
Triton
Moderator
Posts:7397
Joined:Mon May 24, 2004 12:33 pm
360 GamerTag:triton199
Steam ID:triton199
Location:Iowa
Contact:

Post by Triton » Sun Jun 04, 2006 4:30 pm

it would be my guess that it will cost the price of parts plus around 20% but this is totally speculation, we have to have make some profit for the whole thing to be worthwile, and 20% isnt much

User avatar
Skyone
Moderator
Posts:6390
Joined:Tue Nov 29, 2005 8:35 pm
Location:it is a mystery
Contact:

Post by Skyone » Sun Jun 04, 2006 4:35 pm

What do you think all the part are going to cost? I'm just thinking $30 for the base console. That's $20 USD labor and profit.

Post Reply