5v into ps1 screen? Is it needed?
Moderator:Moderators
Do I really need to put the 5v into the ps1 screen? Because it powers on fine when I don't
So im a new guy lol....
My first portable will be complete b4 the end of august (hopefully lol)
The SeGen II port
My first portable will be complete b4 the end of august (hopefully lol)
The SeGen II port
-
lovablechevy
- Portablizer Extraordinaire
- Posts:1104
- Joined:Wed Nov 01, 2006 3:09 pm
- Location:busy with a project
- Contact:
Re: 5v into ps1 screen? Is it needed?
are you planning to use rgb or composite? only using rgb requires the +5v to the screen so that it goes into rgb mode.
the only other time the "screen" needs +5v is if you do an led mod, then the leds need +5v from the screen board.
the only other time the "screen" needs +5v is if you do an led mod, then the leds need +5v from the screen board.
they call me the Queen of Bondo, though maybe i should be called the Queen of Epoxy Putty
current project - code name: blue mushroom!
current project - code name: blue mushroom!
-
gamax92
- Posts:289
- Joined:Sat Aug 21, 2010 4:06 pm
- Location:Inside My Nintendo 64 Ram. (Dont Turn It Off!)
- Contact:
Re: 5v into ps1 screen? Is it needed?
Did not know that.
How many leds do you need to make a decent led mod.
How many leds do you need to make a decent led mod.
I DONT CARE ABOUT POST COUNT.
#DCE1E5 #ECECEC
I DONT CARE ABOUT POST COUNT.nevermind1534 wrote:By, I cringe every time I see a post by you, because of the immense number of useless comments that seem to be there for no reason other than to up your post count.
#DCE1E5 #ECECEC