NEED HELP RECONNECTING SCREEN!!!!

If you're making a portable you probably need something to watch it on. (Unless you want to guess what's happening in the game, but I wouldn't advise that) Anyway, this forum is your "Hacking a pocket TV/screen" one-stop solution. Share your experiences and knowledge here.

Moderator: Moderators

Post Reply
User avatar
andrewdorsey
Posts: 183
Joined: Mon Dec 01, 2008 2:49 pm
Location: hmmmmmmm

NEED HELP RECONNECTING SCREEN!!!!

Post by andrewdorsey » Sat Dec 19, 2009 10:05 pm

So I bought a ps2 screen (intec)
Image
and I took it apart and everything. But when I went to reconnect everything, I realized that I didn't remember where to put the wires!?!?

There are only 4 wires I need help with.
Image

And this is where the wires need to be connected to.
Image

I KNOW THIS IS VERY HARD TO FIGURE OUT, BUT i have tried everything and desperately need your help!

jaron4103
Posts: 25
Joined: Fri Mar 04, 2011 2:11 am
360 GamerTag: ssxsimon
Location: greenup ky

Re: NEED HELP RECONNECTING SCREEN!!!!

Post by jaron4103 » Fri Mar 04, 2011 10:36 am

did you ever find a pin out of your screen..iv got the same problem

Haunted360
Posts: 1000
Joined: Sat Jan 30, 2010 12:22 am
PSN Username: Haunted360
360 GamerTag: Haunted 360
Location: Australia
Contact:

Re: NEED HELP RECONNECTING SCREEN!!!!

Post by Haunted360 » Fri Mar 04, 2011 7:43 pm

Look at the two board. See if you can figure out what pin goes where. May it be voltage, and ground. That is less 2 wires to deal with. Ground is the EASIEST to find because it is usually the MAIN part of the PCB. It is a solid copper line all around the board, at screw posts etc...

You have to try and figure out the links. IE: follow the traces...


Good luck!

Snow_Cat
Posts: 463
Joined: Fri Aug 13, 2010 12:40 pm
Steam ID: Snow_Cat
Location: Here
Contact:

Re: NEED HELP RECONNECTING SCREEN!!!!

Post by Snow_Cat » Sat Mar 05, 2011 12:29 am

Could you post a pic using a macro or a flatbed scanner?

The screen printing on the board may help us figure it out.

Post Reply