anyone play with one of these?
Moderator:Moderators
http://www.shop.com/op/~Additional_Moni ... urceid=298
they are pretty cheap
think they would be all that hard to setup for a portable?
they are pretty cheap
think they would be all that hard to setup for a portable?
- CronoTriggerfan
- Moderator
- Posts:4131
- Joined:Fri Jan 27, 2006 3:07 pm
- Location:University of Michigan - Ann Arbor
- Contact:
- hailrazer
- Portablizer Extraordinaire
- Posts:2764
- Joined:Mon Jul 10, 2006 8:57 pm
- Location:Georgia Sweet Georgia
Sometimes cheaper. Look at the completed auctions or the last 30 days on Ebay :CronoTriggerfan wrote:Really? That cheap? I may have to check that out!hailrazer wrote:And you can get them for around $35 shipped on Ebay.
CTFan
<A HREF="http://search-completed.ebay.com/AudioV ... arch">Ebay Link</A>
- figmentfilm
- Posts:68
- Joined:Mon Nov 06, 2006 12:08 am
there are the guts.
looks like it actually runs on 9v. but i havent tried lowering it yet but ima have it hooked up to a 7.2v battery tonight and ill let you know.
http://cgi.ebay.com/ws/eBayISAPI.dll?Vi ... 0076463125
- Life of Brian
- Moderator
- Posts:2867
- Joined:Wed Aug 03, 2005 5:55 pm
- Location:Oklahoma
- Contact:
- figmentfilm
- Posts:68
- Joined:Mon Nov 06, 2006 12:08 am
Flippin sweet. I actually got a small one in about a week ago. I gotta try it out. A similar one I had would only go down to 9v... but I'm hoping to get it low.
Seems like screen pads have burst back up on ebay for cheap money (I just got 2 for 30 shipped)... But, I'm always on the lookout for cheaper, larger screens to hide the sheer size of the non GOAC/NOAC portables and various other projects...
Of course, now that screen pads are back... it seems like most of the ps1 screens are in a bit of a drought (or were yesterday... )
Cheers! And good research!
Figment
Seems like screen pads have burst back up on ebay for cheap money (I just got 2 for 30 shipped)... But, I'm always on the lookout for cheaper, larger screens to hide the sheer size of the non GOAC/NOAC portables and various other projects...
Of course, now that screen pads are back... it seems like most of the ps1 screens are in a bit of a drought (or were yesterday... )
Cheers! And good research!
Figment
i had this and my fc twin funning off my rc car battery.
very nice screen. good picture quality, no ghosting, decent sound (and got pretty loud), and its boards are pretty small.
i havent figured out where to hook up rgb on it but with the fc twin i think ill just go with straight composite anyway. ill take a better look at it and see if i can hook in rgb.
very nice screen. good picture quality, no ghosting, decent sound (and got pretty loud), and its boards are pretty small.
i havent figured out where to hook up rgb on it but with the fc twin i think ill just go with straight composite anyway. ill take a better look at it and see if i can hook in rgb.
I bought an Audiovox D1500A and it appears to be identical to the EX-50, they "should" support RGB, I just can't figure out how.
There are two chips on the input board:
Sharp IR3Y31M ( 0409 U )
PVI - 1004C ( G0420S734 )
but I haven't been able to turn up a real datasheet for either yet.
How many video wires go into the video board? Mine has two shielded conductors (3 wires) going into the video board, and that says S-video to me.
There are two chips on the input board:
Sharp IR3Y31M ( 0409 U )
PVI - 1004C ( G0420S734 )
but I haven't been able to turn up a real datasheet for either yet.
How many video wires go into the video board? Mine has two shielded conductors (3 wires) going into the video board, and that says S-video to me.