A few scans of the Wavebird GC Controller PCB.
Note: The Wireless module is not shown here as there are 2 versions that I'm aware of. When I have both done up I'll update this with them.
Top of the board, all thru hole components removed.
Top side with components removed and traces exposed. 50/50 composite from top side clean scan, so all traces can be seen, but also what their reference designations were.
Bottom side the same
GC Controller (Wireless) PCB Scans, Wavebird DOL-004
Moderator:Moderators
Screwing up is one of the best learning tools, so long as the only thing you're not learning is how to screw up.
Re-mappable Wireless 360 Controller - The CGnome
Re-mappable Wireless 360 Controller - The CGnome