WaXebird Controller PCB

Includes PS2, Xbox 1, GameCube (but not the Phantom Game Console)

Moderator: Moderators

Post Reply
User avatar
RDC
Posts: 349
Joined: Thu Jul 03, 2008 9:55 pm
Location: VA
Contact:

WaXebird Controller PCB

Post by RDC » Sun Dec 02, 2012 5:21 am

Here's the Wavebird version of the X boards that I've done. The 36X and DuXe being the other ones.

This was the first render after getting the board outline roughly done.

Image

Couple more after adding in everything. I decided to make the footprint for the Stick in a way that either the stock Wavebird Stick can be used, or a PS3 style Stick can be installed if a Stick button is needed.

Image

Image


Here is the prototype made up for checking and testing things out.

Image

Image

The 'C-stick' board will also get redone so either type of Stick can be used in it's place.

X-stick board
Image

I haven't decided yet if I'll redo the small LTrig and RTrig boards, since they can just be swapped over from the original board and are only a button contact, there's not much point in reinventing that wheel.


There are a few things that need to be tweaked on the main board before I'll consider this one complete, but I figured I'd show it off as is.
Screwing up is one of the best learning tools, so long as the only thing you're not learning is how to screw up.
Re-mappable Wireless 360 Controller - The CGnome

Post Reply