Hey guys, just looking for some help with a gcp I'm doing.
So, first -Can some one give me the locations of where I can attach the controller leads to on the main mobo? I'd like to cut off that connector but I'm unsure of where to solder the connections.
second -Can someone give me the locations of the Solder points for the drive PCB? I've seen some, but not all the connections were used. Are most ground pins?
And any other tips would be awesome, thanks. I've done a PSone portable so I'm not clueless, just in need of practice. The PSone was done several months ago, and I've been busy with other projects since.
GCp help needed
Moderator:Moderators
- griehm
- Posts:145
- Joined:Mon Jun 07, 2010 8:16 pm
- PSN Username:hotchik3nflings
- Steam ID:invisiblejack22
- Location:Vancouver BC CANADA
Setting up a website- I need input!
If you've got time- PM me for link.
If you've got time- PM me for link.
Re: GCp help needed
http://forums.benheck.com/viewtopic.php?f=7&t=42403" onclick="window.open(this.href);return false;
- griehm
- Posts:145
- Joined:Mon Jun 07, 2010 8:16 pm
- PSN Username:hotchik3nflings
- Steam ID:invisiblejack22
- Location:Vancouver BC CANADA
Re: GCp help needed
Wow, you are awesome. Do you sell cases? The ones you've are pretty sweet...
Setting up a website- I need input!
If you've got time- PM me for link.
If you've got time- PM me for link.
- griehm
- Posts:145
- Joined:Mon Jun 07, 2010 8:16 pm
- PSN Username:hotchik3nflings
- Steam ID:invisiblejack22
- Location:Vancouver BC CANADA
Re: GCp help needed
Hmmm. I would almost buy a completed unit but it ruins the fun...
So far it all makes some sense, just confused on a couple things but I'll figure it out
I'm wanting to do my own design, and for materials I'm going to use metal sheets, possibly with a slide up screen, but that's only if it isn't going to be possible... *sigh I'll probably be stuck with a standard case.
So far it all makes some sense, just confused on a couple things but I'll figure it out
I'm wanting to do my own design, and for materials I'm going to use metal sheets, possibly with a slide up screen, but that's only if it isn't going to be possible... *sigh I'll probably be stuck with a standard case.
Setting up a website- I need input!
If you've got time- PM me for link.
If you've got time- PM me for link.