PS2 RGB issue

[codeman]

I've been trying to get RGB to work on my PSOne screen, but all I can get is video with a very green tint. I've followed all the threads and I've done everything that I've seen in them, and I still get the green picture. I lifted capacitors CV53, 54 and 55, and tied the RGB signals to them, and connected the composite video signal (also the C-sync signal, right?) from the PS2 to the C-sync input on the screen.

Is there something I'm missing? Is there anything I need to do on the PS2 board itself? Right now I'm just taking the signals directly from the AV output header on the PS2 board.

Thanks for your help

[AngelArm1110]

the problem may be your ps2's video settings, open the system configuration and try playing around with the settings in there

[bassmasta]

Are you taking the signal from the AV port or from the capacitors? When I last looked at the mod, you pulled the signals from the capacitors so you would miss all of the junk that gives it a green tint.

You could also try a resistor/potentiometer to weaken the green signal.

[codeman]

That was exactly the problem AngelArm. I didn't know I had to set the system to output RGB. Thanks so much, it looks beautiful!

[AngelArm1110]

no problem, i had the same issue with my portable, and the answer was so obvious i kicked myself for not thinking of it first,