GC error & audio problem

Includes PS2, Xbox 1, GameCube (but not the Phantom Game Console)

Moderator:Moderators

Post Reply
Gannondorf929
Posts:13
Joined:Mon May 23, 2011 3:16 pm
Steam ID:Gannondorf929
GC error & audio problem

Post by Gannondorf929 » Tue Jun 07, 2011 7:15 pm

I hardwired the regulator board to the revision a gamecube (using the 4-wires), but when I turn it on, the audio is distorted and it goes to an error screen after a few seconds. Is it shorting out, or is it something else? I removed all of the ports, including the dd, except for the audio/video.
Top
User avatar
Ashen
Posts:191
Joined:Fri May 09, 2008 8:53 am
Location:PA

Re: GC error & audio problem

Post by Ashen » Tue Jun 07, 2011 9:43 pm

If there is no DD hooked up the GC will always get an error on boot.
ImageImageImageImageImageImage
Top
Gannondorf929
Posts:13
Joined:Mon May 23, 2011 3:16 pm
Steam ID:Gannondorf929

Re: GC error & audio problem

Post by Gannondorf929 » Thu Jun 09, 2011 4:31 am

that makes sense, but what about the distorted audio? is that just because 5v isn't supposed to power the sound?
Top
User avatar
Ashen
Posts:191
Joined:Fri May 09, 2008 8:53 am
Location:PA

Re: GC error & audio problem

Post by Ashen » Thu Jun 09, 2011 7:56 am

Most likely. If you're using the original regulator board anyway. Why not just hook the 12v line back up?
ImageImageImageImageImageImage
Top
Gannondorf929
Posts:13
Joined:Mon May 23, 2011 3:16 pm
Steam ID:Gannondorf929

Re: GC error & audio problem

Post by Gannondorf929 » Thu Jun 09, 2011 6:08 pm

Allright, duly noted. Will do
Top
Post Reply

Return to “2000's Gaming”