could you maybe post pics?Basement_Modder wrote:eurddrue said:
techknott, you just inspired me to make a gamecube portable!
Me too. I followed his pics and made a working one thats exactly the same (minus the case).
Gamecube Portable (abandoned)
Moderator:Moderators
- themadhacker
- Senior Member
- Posts:2670
- Joined:Wed Aug 06, 2008 7:53 pm
- Location:ohio
- Life of Brian
- Moderator
- Posts:2867
- Joined:Wed Aug 03, 2005 5:55 pm
- Location:Oklahoma
- Contact:
- Life of Brian
- Moderator
- Posts:2867
- Joined:Wed Aug 03, 2005 5:55 pm
- Location:Oklahoma
- Contact:
Its a psone lcd with the controller/driver in the main housing. The LCD and 4 LED's are the only things mounted in the flip top. I had to get rid of most of the plastic housing on the LCD to get it all in though.
Ive desoldered the connector from the board and just wired it straight through so the LCD can be easily removed if need be. Ive also chopped a lot off the board and relocated caps, resistors etc to fit it in.
Ive desoldered the connector from the board and just wired it straight through so the LCD can be easily removed if need be. Ive also chopped a lot off the board and relocated caps, resistors etc to fit it in.
- lovablechevy
- Portablizer Extraordinaire
- Posts:1104
- Joined:Wed Nov 01, 2006 3:09 pm
- Location:busy with a project
- Contact:
wow....
there are just no other words...
there are just no other words...
they call me the Queen of Bondo, though maybe i should be called the Queen of Epoxy Putty
current project - code name: blue mushroom!
current project - code name: blue mushroom!
- Life of Brian
- Moderator
- Posts:2867
- Joined:Wed Aug 03, 2005 5:55 pm
- Location:Oklahoma
- Contact:
- CronoTriggerfan
- Moderator
- Posts:4131
- Joined:Fri Jan 27, 2006 3:07 pm
- Location:University of Michigan - Ann Arbor
- Contact:
- mothatrucka
- Banned
- Posts:588
- Joined:Sun May 04, 2008 12:21 pm
Not really difficult at all. All I did was desolder the connector and extend about 20 wires.mothatrucka wrote:That is some amazing work! Was it difficult to move the screen like that? Or was it just time-consuming?
Not posting anything new until this ones finished. But I have another Gamecube, a Dreamcast, a PS2 and a XBOX1 all to be portablized. Im in 2 minds between a GC mk2 and the Dreamcast as I never owned one of those before.DK wrote:Got any pics of the MK2 design? Or is it all hush hush?
- Basement_Modder
- Portablizer
- Posts:962
- Joined:Sun Aug 24, 2008 7:16 am
- Location:Next door to my neighbor
- Contact:
- Joes2Silly
- Posts:1345
- Joined:Mon Apr 04, 2005 8:19 pm
- Location:SA, TX
- Contact:
Re: RRRRUMBLE???
Do you need a rumble feature? Other than that, nice jobBasement_Modder wrote:will u have the rumble feature