PS2's Optical Out Port
Moderator:Moderators
Hey guys just a quick question. the optical out on the back of the ps2(glows red when ps2 is on) if i desoldered that off the board would it affect the ps2, im thinking that it wont do a thing but i just want to make sure. Cheers^_^
- ShockSlayer
- Niblet 64
- Posts:5059
- Joined:Thu Jun 29, 2006 12:47 pm
- Location:In my inbox.
Not likely, as I've never worked with a ps2. But I DO know that if its like an av out or controller port, its just contacts.
SS
SS
http://twitter.com/ShockSlayer" onclick="window.open(this.href);return false;
- bicostp
- Moderator
- Posts:10491
- Joined:Mon Mar 07, 2005 5:47 pm
- Steam ID:bicostp
- Location:Spamalot
- Contact:
It would work. I don't see why you'd remove it but you could if you wanted to. (It's for audio out. None of my 80s stereo hardware accepts it, but big, new, expensive stuff does.)
Twitter
http://www.pcwgaming.com" onclick="window.open(this.href);return false;
If you want a Dropbox account, please use my referral link
http://www.pcwgaming.com" onclick="window.open(this.href);return false;
If you want a Dropbox account, please use my referral link
Thanx it does work i did it.
Ive worked with Ps2 for 4 years now and only had one break that was a version 3 after i moded it and it didnt work so i picked it up and hurled it at the wall. lol then i found out i just blew a fuse lol. anyway thanx again Cheers.timmeh87 wrote:if you do it very carefully it shouldn't break your ps2.
however, taking your ps2 apart in the first place is almost like asking it to break (in my experience)