PS2 Dualshock 2 Button Re-Wiring

Includes PS2, Xbox 1, GameCube (but not the Phantom Game Console)

Moderator: Moderators

Post Reply
User avatar
eastsider_1
Posts: 219
Joined: Sat Jul 02, 2005 4:03 am
Location: GA
Contact:

PS2 Dualshock 2 Button Re-Wiring

Post by eastsider_1 » Sun Aug 06, 2006 1:42 pm

I'm having the biggest problem yet is rewiring my L and R buttons on the Dualshock 2. I got a controller with the ribbon connector so i could wire switches to the pins, but damn the pins are confusing me!! Also, if somone has some info about the pinouts and how to wire the switches properly that would greatly help me overcome this. Thanks
PS2M-99% -Final Stages of the 1st O.G. PS2 Portable (Will this ever get done??)

PSTwoSP- 50%
Rewiring Controller, LED Modding Screen

User avatar
demonofaj
Portablizer Extraordinaire
Posts: 2553
Joined: Tue Jun 21, 2005 2:52 pm
PSN Username: ajsen1gma
Steam ID: demonofaj
Location: NYC (718)
Contact:

Post by demonofaj » Mon Aug 07, 2006 10:18 am

All I can say is FOLLOW THE TRACE! Say you want X, take a blue highlighter and highlight the source on that flimsy ribbon plastic paper sheet, and by the way, the command is the one that doesn't connect to other buttons. Then with that hightlighter, follow the trace to the source, and then remember the pin it goes, try and follow it to the bottom and there you are, you have to base it on optical sense, well, that's all I can do.
"Life's a female of the dog species, then you die.."

User avatar
Skyone
Moderator
Posts: 6390
Joined: Tue Nov 29, 2005 8:35 pm
Location: it is a mystery
Contact:

Post by Skyone » Mon Aug 07, 2006 2:27 pm

Wait, the pinouts for the 16-18 pins on the main part on the ps2 controller board? If so, I have them. PM me.

Post Reply