The Big SEGA Info Sticky!
Moderator:Moderators
- bicostp
- Moderator
- Posts:10491
- Joined:Mon Mar 07, 2005 5:47 pm
- Steam ID:bicostp
- Location:Spamalot
- Contact:
OK, the Sega forum is lacking a reference sticky, so I'd better get off my lazy butt and make one!
THIS STICKY IS ALWAYS UNDER CONSTRUCTION!
Feel free to add your own info! -The Management
Please be patient as I slowly piece the Sega info together. )
Places to get Cartridge connectors:
-Old consoles
-Digikey
-Game Genies
-Sonic & Knuckles cartridges
Most 64-pin card-edge connectors with a .1 pitch will work.
<b><a href="http://benheck.com/Downloads/RadicaCart ... jpg">Click here for the Radica-cart slot pinout chart</b></a>
The chart may look confusing, but don't worry, it's not too hard. Just match the pin on the ROM chip to the pin on the cart slot with the same name (A10 to A10, b52 to b52, GND to GND...)
AV pinouts:
<img src="http://www.gamesx.com/grafx/32xpin.jpg"><img src="http://www.gamesx.com/grafx/gen1.jpg">
Note! The numbering sequence on this diagram is NOT the proper numbering, and won't match the numbers on your connector.
Important thread directory
<a href="http://benheck.com/phpBB/viewtopic.php?t=2764">Cart Slots</a>
THIS STICKY IS ALWAYS UNDER CONSTRUCTION!
Feel free to add your own info! -The Management
Please be patient as I slowly piece the Sega info together. )
Places to get Cartridge connectors:
-Old consoles
-Digikey
-Game Genies
-Sonic & Knuckles cartridges
Most 64-pin card-edge connectors with a .1 pitch will work.
<b><a href="http://benheck.com/Downloads/RadicaCart ... jpg">Click here for the Radica-cart slot pinout chart</b></a>
The chart may look confusing, but don't worry, it's not too hard. Just match the pin on the ROM chip to the pin on the cart slot with the same name (A10 to A10, b52 to b52, GND to GND...)
AV pinouts:
<img src="http://www.gamesx.com/grafx/32xpin.jpg"><img src="http://www.gamesx.com/grafx/gen1.jpg">
Note! The numbering sequence on this diagram is NOT the proper numbering, and won't match the numbers on your connector.
Important thread directory
<a href="http://benheck.com/phpBB/viewtopic.php?t=2764">Cart Slots</a>
Last edited by bicostp on Sun Mar 19, 2006 3:12 pm, edited 2 times in total.
Twitter
http://www.pcwgaming.com" onclick="window.open(this.href);return false;
If you want a Dropbox account, please use my referral link
http://www.pcwgaming.com" onclick="window.open(this.href);return false;
If you want a Dropbox account, please use my referral link
- dragonhead
- Posts:952
- Joined:Sun Apr 04, 2004 4:28 pm
- Location:NH, USA
- Contact:
- bicostp
- Moderator
- Posts:10491
- Joined:Mon Mar 07, 2005 5:47 pm
- Steam ID:bicostp
- Location:Spamalot
- Contact:
Depends on the screen's scan rate. (I believe standard AV RGB is 15khz, but most screens only go down to 30khz...)
You could probably build the Dreamcast VGA box from gamesx.com and rig it to the Genesis pins, though...
You could probably build the Dreamcast VGA box from gamesx.com and rig it to the Genesis pins, though...
Twitter
http://www.pcwgaming.com" onclick="window.open(this.href);return false;
If you want a Dropbox account, please use my referral link
http://www.pcwgaming.com" onclick="window.open(this.href);return false;
If you want a Dropbox account, please use my referral link
You might want to imageshack those pics, or just post the url, to save gamesx some bandwidth.
I'm not sure if you want to add portables that people have made, but if so here's mine.
G-force's Genesis Ondago
G-force's Genesisp
(yeah, it's junky since I made it a long time ago, but still a classic )
And here's a small pinout I made for the Genesis V2 for the ondago page.
I'm not sure if you want to add portables that people have made, but if so here's mine.
G-force's Genesis Ondago
G-force's Genesisp
(yeah, it's junky since I made it a long time ago, but still a classic )
And here's a small pinout I made for the Genesis V2 for the ondago page.
Last edited by G-force on Sat Nov 05, 2005 12:42 pm, edited 1 time in total.
- xriverfalconx
- Posts:481
- Joined:Tue Jul 19, 2005 12:57 pm
- Location:Vana'Diel - Titan Server
- Contact:
I'm still having issues with my cart slot on the radica!!! Damn thing is a pain in the ass. I've been through 3 freakin radicas and still nothing!!! MOTHER FREAKER!!! I'll probably purchase a radica and have someone else do it for me that's experienced with it. ( at ben)
But this is a great idea and longer overdue! Nice work so far! I'll try to compile what I have tomorrow when I get to work!
But this is a great idea and longer overdue! Nice work so far! I'll try to compile what I have tomorrow when I get to work!
<a href="http://www.gmrealm.us">http://www.gmrealm.us</a>
-PC Modification Project- (special thanks to Foxx373) - Complete-
-WIP- mT16P (Portable Turbo Grafx 16)
-PC Modification Project- (special thanks to Foxx373) - Complete-
-WIP- mT16P (Portable Turbo Grafx 16)
-
- Posts:106
- Joined:Sat Feb 18, 2006 9:08 pm
- Location:Ont, Canada
- Contact:
ground?
ok very stupid question I forgot but what does the ground do?
- geekbait111
- Posts:413
- Joined:Tue Feb 14, 2006 9:15 am
- Location:hiding your attic...waiting
- geekbait111
- Posts:413
- Joined:Tue Feb 14, 2006 9:15 am
- Location:hiding your attic...waiting