I saw someone do it before but it didn't say how...I don't want to spend my money on a system i already have and my neighbor won't trade his
So i am asking u members of Benjamin Heckerdorn's site(aka better than me at portable's) Is it possible of me to hack on original SNES down to a smaller size(like the Atari 2600)? Any help would be greatly appreciated.
Can i hack up a original model of the SNES to a smaller size
Moderator:Moderators
- cowsgoquack101
- Senior Member
- Posts:1981
- Joined:Thu Aug 04, 2005 9:21 am
- Steam ID:cowsgoquack101
- Location:Cold, grey Indiana!
- Contact:
- Metroid fan
- Senior Member
- Posts:2158
- Joined:Fri Apr 15, 2005 2:36 pm
- Location:Somewhere in the universe
- Contact:
Yes the grounding strips can be cut off just in case i'm not saying your an idiot they are the strips of metal on all the sides.
You might be able to cut it smaller but if you can I don't know about it.
You might be able to cut it smaller but if you can I don't know about it.
Last edited by Metroid fan on Sat Aug 06, 2005 11:03 pm, edited 1 time in total.
- cowsgoquack101
- Senior Member
- Posts:1981
- Joined:Thu Aug 04, 2005 9:21 am
- Steam ID:cowsgoquack101
- Location:Cold, grey Indiana!
- Contact:
Yes all systems after the NES used the evil Nintendo screws. However if you did a search you'll find ways of getting them out. You can also find ways on doomportabls.
vskid wrote:Nerd = likes school, does all their homework, dies if they don't get 100% on every assignment
Geek = likes technology, dies if the power goes out and his UPS dies too
I am a geek.