Hey guys, I'm new here.
To get right to the point, I was performing the internal VGA mod for the Dreamcast, and I managed to wreck the +5v solder point that is shown in this diagram from mmmonkey.com
Point 5.
No solder will stick to this point anymore, so I was wondering if any of you know of any other points on the board that I could get my +5v supply from.
Images would be most helpful.
Thanks
Dreamcast Solder Points
Moderator:Moderators
- HungHsiKuan
- Posts:2
- Joined:Mon May 21, 2012 4:47 pm
Last edited by HungHsiKuan on Wed May 23, 2012 9:59 pm, edited 1 time in total.
-
- Posts:122
- Joined:Sat Apr 07, 2012 10:54 am
- 360 GamerTag:qwertymodo
- Steam ID:qwertymodo
Re: Dreamcast Solder Points
Your image link is broken, but if there are any traces coming off of that point, you should be able to scrape off the solder mask enough to reveal a new solder point.
- HungHsiKuan
- Posts:2
- Joined:Mon May 21, 2012 4:47 pm
Re: Dreamcast Solder Points
Image link should be fixed. And as you will see, the trace is very short, and I managed to ruin that at the same time.qwertymodo wrote:Your image link is broken, but if there are any traces coming off of that point, you should be able to scrape off the solder mask enough to reveal a new solder point.
-
- Posts:19
- Joined:Mon Mar 21, 2011 8:36 am
Re: Dreamcast Solder Points
Looks to me like it goes to the underside of the board. test with a multimeter.