Naturally,the only run that gets damaged was the one that Ben marked "Video" on the SNES board -_-
He got the R/L audio from an IC is there a secondary place to get the Video? Or is my best bet scratching the green away from the board and soldering to the copper by the leads-hole
Help-Secondary place to get Video signal from SNES?
Moderator:Moderators
-
- Posts:5
- Joined:Sun Feb 05, 2012 12:11 pm
- 360 GamerTag:thefatalcancer
- Steam ID:afatalcancer
-
- Posts:5
- Joined:Sun Feb 05, 2012 12:11 pm
- 360 GamerTag:thefatalcancer
- Steam ID:afatalcancer
Re: Help-Secondary place to get Video signal from SNES?
Ive found secondary places for the audio and the controllers each have very nice secondaries...no idea on the video though haha,and thats the one that matters >.<
-
- Posts:257
- Joined:Sat Feb 05, 2011 8:18 pm
Re: Help-Secondary place to get Video signal from SNES?
Follow the line from the trace with a multimeter, and see if there's an alternate solder point.
ShockSlayer wrote:Proggy's right.
ttsgeb wrote:mfw prog was not only right, but 100% so.