2 Controllers Into 1

Includes but not limited to: SNES, Genesis, Sega CD, PlayStation 1, Nintendo 64, Dreamcast, Game Gear and I guess the Virtual Boy.

Moderator:Moderators

User avatar
evilteddy
Portablizer
Posts:423
Joined:Tue Mar 25, 2008 2:11 am
360 GamerTag:Kirren of Smeg
Steam ID:kizzinator
Location:Newcastle, Australia
Re: 2 Controllers Into 1

Post by evilteddy » Thu Dec 29, 2011 8:39 am

Now that I think more on it in the light of day with my brain awake you will of course need to use an AND gate not a NAND which is what Micro has been kind enough to show you.
Last edited by evilteddy on Thu Dec 29, 2011 4:35 pm, edited 1 time in total.

User avatar
micro
Posts:13
Joined:Thu Feb 10, 2011 12:26 pm

Re: 2 Controllers Into 1

Post by micro » Thu Dec 29, 2011 8:41 am

Don't use the setup shown on your (first) pic. That's probably gonna damage your controllers when one controller is driving the data line high and the other one low.

You also don't have to mess with the console itself. Just connect the data wires from the 2 controllers to pin 1 and 2 and the data wire leading to the console to pin 6...

SweBjorn
Posts:24
Joined:Tue Dec 27, 2011 7:30 pm

Re: 2 Controllers Into 1

Post by SweBjorn » Thu Dec 29, 2011 9:32 am

Bare with me guys, I know I sound stupid. But I have a couple of question marks. Tried to make a scetch to show what I still dont understand. Im very eager to try this today, but stores close in 1h30 or so :/

Image

Sounds to me like I'm not going to use the other 4 wires? Only the red (data-wire)? Then what are the others for :/

User avatar
micro
Posts:13
Joined:Thu Feb 10, 2011 12:26 pm

Re: 2 Controllers Into 1

Post by micro » Thu Dec 29, 2011 9:59 am

Have a look at this picture:

Image

You can tie together all the wires that got the same color EXCEPT for the data wires. You have to connect those 2 wires to the 7400. The result goes into your SNES console. Use the brown and white wire to provide power to the 7400 IC. Also don't forget to connect the pins 3, 4 & 5 on the 7400 =)

SweBjorn
Posts:24
Joined:Tue Dec 27, 2011 7:30 pm

Re: 2 Controllers Into 1

Post by SweBjorn » Thu Dec 29, 2011 10:40 am

Alright now I understand! Thanks. One thing though. You connected the white wire together before you put it into the 7400. Can I just put all 3 white into it?

I sketched it so I can follow this picture as a guide. But need to know if I did it correctly. So please look over mine and see if that would work:

Image
http://img6.imageshack.us/img6/5673/mysnes2.png" onclick="window.open(this.href);return false;

And also, connecting the 3-4-5, can I just use a coppar wire or some random crap from a speaker to do that?
Last edited by SweBjorn on Thu Dec 29, 2011 10:55 am, edited 1 time in total.

User avatar
micro
Posts:13
Joined:Thu Feb 10, 2011 12:26 pm

Re: 2 Controllers Into 1

Post by micro » Thu Dec 29, 2011 10:55 am

Yes, this should work =)

User avatar
jjhammerstein
Senior Member
Posts:1562
Joined:Tue Nov 18, 2008 7:15 pm
Location:Southern CT
Contact:

Re: 2 Controllers Into 1

Post by jjhammerstein » Thu Dec 29, 2011 2:15 pm

This thread is full of beautiful pictures.
GET FREE WOW GOLD SEX VISIT MODRETRO


SweBjorn
Posts:24
Joined:Tue Dec 27, 2011 7:30 pm

Re: 2 Controllers Into 1

Post by SweBjorn » Thu Dec 29, 2011 2:21 pm

Can't really find a swedish place that sells NAND 7400. So I might go with the site you provided. But there are many types of it, and accessories that comes with it.
Part# Status Temp (oC) Price | QTY Package | Pins Top Side Marking Package QTY | Carrier Distributor Inventory TI 1k Lead Time Sample or Buy
SN7400D ACTIVE 0 to 70 0.90 | 1ku SOIC (D) | 14 View 50 | TUBE >5k 1k quantity lead time: In stock
SN7400DE4 ACTIVE 0 to 70 0.90 | 1ku SOIC (D) | 14 View 50 | TUBE No Stock For lead times contact TI Authorized Distributor or local TI sales office Contact Distributor
SN7400DG4 ACTIVE 0 to 70 0.90 | 1ku SOIC (D) | 14 View 50 | TUBE 200 For lead times contact TI Authorized Distributor or local TI sales office
SN7400N ACTIVE 0 to 70 0.95 | 1ku PDIP (N) | 14 View 25 | TUBE >5k 1k quantity lead time: In stock
Samples Device in Cart
SN7400N3 OBSOLETE 0 to 70 PDIP (N) | 14 View No Stock For lead times contact TI Authorized Distributor or local TI sales office Not Available
SN7400NE4 ACTIVE 0 to 70 0.95 | 1ku PDIP (N) | 14 View 25 | TUBE 506 Typical lead time for 1k quantity: 4 to 8 weeks
If I press "Sample and Buy" on SN7400N, cause that one exists in Europe in stock. There are like 6 buy buttons and several quantity things I need to decide :S Very complicated. Actually, anybody know another website that sells NAND 7400 with like 1 button xD
micro wrote:Yes, this should work =)
Great to hear!
jjhammerstein wrote:This thread is full of beautiful pictures.
Indeed it is, graphical representations much better than written :)

SweBjorn
Posts:24
Joined:Tue Dec 27, 2011 7:30 pm

Re: 2 Controllers Into 1

Post by SweBjorn » Fri Dec 30, 2011 9:48 am

I found another site that wants money in a currency called Rs. What is Rs, like seriously how hard should it be to buy a gate. Why not $ or £ or €.

http://www.simplelabs.co.in/content/ic-7400-nand-gate" onclick="window.open(this.href);return false;

User avatar
evilteddy
Portablizer
Posts:423
Joined:Tue Mar 25, 2008 2:11 am
360 GamerTag:Kirren of Smeg
Steam ID:kizzinator
Location:Newcastle, Australia

Re: 2 Controllers Into 1

Post by evilteddy » Fri Dec 30, 2011 7:01 pm

At the website you were at before get the sample for this one:

SN7400N ACTIVE 0 to 70 0.95 | 1ku PDIP (N) | 14 View 25 | TUBE >5k 1k quantity lead time: In stock

The other site you linked for is asking for Ruppees because its in India.

User avatar
Klefmung
Senior Member
Posts:1517
Joined:Fri Aug 05, 2005 12:23 am
Location:Crystal palace
Contact:

Re: 2 Controllers Into 1

Post by Klefmung » Sun Jan 01, 2012 3:21 am

Why dont you just wire the controllers together on the other side of the chip? send one set of signals straight to the SNES, then just send each button signal and a common ground to both controllers... then it will be like there is one controller on the SNES side, except two places (in two different physical encasements) that each of those button signals could get grounded out. I feel like that is the much simpler way of doing this.
gannon wrote:hmm... *ponders about power abuse* :P
benheck wrote:Wow, guess I should have searched my own forums! Oh wait, I don't have to since the rules don't apply to me ;)

User avatar
Klefmung
Senior Member
Posts:1517
Joined:Fri Aug 05, 2005 12:23 am
Location:Crystal palace
Contact:

Re: 2 Controllers Into 1

Post by Klefmung » Sun Jan 01, 2012 3:27 am

I posted a reply, but it isn't showing up. How strange.

Why dont you just wire the controllers together on the other side of the chip? send one set of signals straight to the SNES, then just send each button signal and a common ground to both controllers... then it will be like there is one controller on the SNES side, except two places (in two different physical encasements) that each of those button signals could get grounded out. I feel like that is the much simpler way of doing this.

edit: Now it did? Odd.
gannon wrote:hmm... *ponders about power abuse* :P
benheck wrote:Wow, guess I should have searched my own forums! Oh wait, I don't have to since the rules don't apply to me ;)

User avatar
evilteddy
Portablizer
Posts:423
Joined:Tue Mar 25, 2008 2:11 am
360 GamerTag:Kirren of Smeg
Steam ID:kizzinator
Location:Newcastle, Australia

Re: 2 Controllers Into 1

Post by evilteddy » Sun Jan 01, 2012 5:41 am

Simply because that approach would require that you send 13 wires in between the master controller and the slave and would require that you make a controller board from scratch. The alternate approach is much more elegant.

User avatar
Klefmung
Senior Member
Posts:1517
Joined:Fri Aug 05, 2005 12:23 am
Location:Crystal palace
Contact:

Re: 2 Controllers Into 1

Post by Klefmung » Sun Jan 01, 2012 2:16 pm

I was thinking more along the lines of a little box (with just the IC, really) which sent out from all angles. I mean, some sort of box would have to be involved anyhow. Like, have your two controllers, open them both up, and take the ICs out, then stick one of the ICs in a little box, with all the console signals going to the plug, then have the 13 (small, enclosed in something) wires going to each controller. I feel like a master-slave setup would be a tad more awkward in any sense. In this one, it feels just like a normal controller would, but with them both going to a box, then to the console. Also cheaper and easier. I dunno, just me though. The only con, really, is that 13 wires is a lot of wires. I spose it's lots of extra work (and a little bit of extra expense) vs. a big chord.
gannon wrote:hmm... *ponders about power abuse* :P
benheck wrote:Wow, guess I should have searched my own forums! Oh wait, I don't have to since the rules don't apply to me ;)

User avatar
evilteddy
Portablizer
Posts:423
Joined:Tue Mar 25, 2008 2:11 am
360 GamerTag:Kirren of Smeg
Steam ID:kizzinator
Location:Newcastle, Australia

Re: 2 Controllers Into 1

Post by evilteddy » Sun Jan 01, 2012 4:25 pm

Well ideally the and gate approach would have SNES controller sockets on it so you would only have to plug them in. There would be no openning up of controllers and really only messing with one wire. More elegant and less work.

Post Reply