I am lost....

Includes but not limited to: SNES, Genesis, Sega CD, PlayStation 1, Nintendo 64, Dreamcast, Game Gear and I guess the Virtual Boy.

Moderator:Moderators

Post Reply
justkiller91
Posts:3
Joined:Fri Aug 19, 2011 8:09 am
I am lost....

Post by justkiller91 » Fri Aug 19, 2011 8:14 am

So ive been searching or hours for this but is there anyway i can wire rca up to this screen?


http://imageshack.us/photo/my-images/85 ... 75823.jpg/

User avatar
griehm
Posts:145
Joined:Mon Jun 07, 2010 8:16 pm
PSN Username:hotchik3nflings
Steam ID:invisiblejack22
Location:Vancouver BC CANADA

Re: I am lost....

Post by griehm » Fri Aug 19, 2011 9:53 am

Depends on where you got the screen from. if it's just a proprietary connector then no. You'll need a screen with a board that accepts video signals, like the PS1 LCD screen (http://www.amazon.com/LCD-Screen-playst ... B00005QI2S" onclick="window.open(this.href);return false;) or any other smaller sized portable TV
Setting up a website- I need input!
If you've got time- PM me for link.

User avatar
bassmasta
Posts:684
Joined:Sun Sep 06, 2009 8:56 pm
Steam ID:randomguy737
Contact:

Re: I am lost....

Post by bassmasta » Fri Aug 19, 2011 11:10 pm

Probably not. That doesn't look like the part where you can put in video signals, it looks like the cable with signals that come from the LCD driver board.

If you still have the driver board for the LCD and it accepts composite (yellow RCA plug) video input, then you can, but you will have to use the board with it. If it doesn't, there's a small chance that you can feed it composite video by looking up the pinout of the video chip onboard and putting signal directly into it. Look for a pin called C, or video maybe (can't remember :oops: ). If Chroma/Luma are there, then you could use s-video.
zeturi wrote:If you're getting 404'd when trying to use the links in stickies, try this tutorial to find that juicy info.

Haunted360
Posts:1000
Joined:Sat Jan 30, 2010 12:22 am
PSN Username:Haunted360
360 GamerTag:Haunted 360
Location:Australia
Contact:

Re: I am lost....

Post by Haunted360 » Sat Aug 20, 2011 2:25 am

You can always make your own driver board with an FPGA :wink:

justkiller91
Posts:3
Joined:Fri Aug 19, 2011 8:09 am

Re: I am lost....

Post by justkiller91 » Sat Aug 20, 2011 6:21 am

Its form an old venturer portable dvd player, I have the driver bord. It has rca out but not sure if this can be used for input. thanks.

Haunted360
Posts:1000
Joined:Sat Jan 30, 2010 12:22 am
PSN Username:Haunted360
360 GamerTag:Haunted 360
Location:Australia
Contact:

Re: I am lost....

Post by Haunted360 » Sat Aug 20, 2011 10:50 am

justkiller91 wrote:Its form an old venturer portable dvd player, I have the driver bord. It has rca out but not sure if this can be used for input. thanks.
Sounds like the type of screen I had...

Look for an input connection on the board. Most of them have them...

Look up datasheets for the IC's and track it down..
Last edited by Haunted360 on Sat Aug 20, 2011 11:51 pm, edited 1 time in total.

justkiller91
Posts:3
Joined:Fri Aug 19, 2011 8:09 am

Re: I am lost....

Post by justkiller91 » Sat Aug 20, 2011 12:57 pm

PVS1262SP is the only number i could see.... couldn't find a datasheet, might just try a different screen.

Post Reply