Pins fell out of motherboard
Moderator:Moderators
While removing the ports from my motherboard, some of the pins fell out, leaving only the holes. I figure I should still be able to solder the holes, but I want to make sure this is okay. Can I still resolder the points if the pins fell out? If not, can I fix this?
-
- Posts:73
- Joined:Sat Feb 20, 2010 10:41 pm
Re: Pins fell out of motherboard
Are you talking about the extension port on the bottom of the n64? If so you don't need to fill them up.
Re: Pins fell out of motherboard
Controller and power ports.
-
- Posts:73
- Joined:Sat Feb 20, 2010 10:41 pm
Re: Pins fell out of motherboard
Well if you plan on bridging the power switch and using the player ports then yes you solder the holes.