I was trying to rewire the memory card slot when i rant into a problem. The pins keep the slot stuck to the board even if you apply a soldering iron to them. Does anyone know how to remove the slot?
(people on modretro told me to not post)
Re-wiring the memory card/ rumble motor slot
Moderator:Moderators
- MODDEDbyME
- Posts:8
- Joined:Tue Feb 15, 2011 3:02 pm
The Hyrule 64 Portable... Coming April 2011
(only to add to the mass blob of n64 portables already made)
(only to add to the mass blob of n64 portables already made)
- humakabula1
- Posts:728
- Joined:Sun May 30, 2010 3:11 am
- 360 GamerTag:H1writer
- Location:Diggi Down Under
Re: Re-wiring the memory card/ rumble motor slot
how's the chan-clan going?MODDEDbyME wrote:(people on modretro told me to not post)
Wedgix (custom linux distro): 20% complete
- evilteddy
- Portablizer
- Posts:423
- Joined:Tue Mar 25, 2008 2:11 am
- 360 GamerTag:Kirren of Smeg
- Steam ID:kizzinator
- Location:Newcastle, Australia
Re: Re-wiring the memory card/ rumble motor slot
What are you using to desolder the pins? With any object with heaps of pins it can be hard to get it to budge but if you spend a huge amount of time getting all the solder off the pins then it should eventually come out.
- MODDEDbyME
- Posts:8
- Joined:Tue Feb 15, 2011 3:02 pm
Re: Re-wiring the memory card/ rumble motor slot
I've just been putting the soldering iron to the pins and bending the pins until they come off. It takes forever but it works.
The Hyrule 64 Portable... Coming April 2011
(only to add to the mass blob of n64 portables already made)
(only to add to the mass blob of n64 portables already made)
- Life of Brian
- Moderator
- Posts:2867
- Joined:Wed Aug 03, 2005 5:55 pm
- Location:Oklahoma
- Contact:
Re: Re-wiring the memory card/ rumble motor slot
A desoldering iron works wonders, and they're cheap from RadioShack. Or, use a somewhat high wattage iron with desoldering braid.
dragonhead wrote:sweet. ive spent a third of my life on benheck!
- Basement_Modder
- Portablizer
- Posts:962
- Joined:Sun Aug 24, 2008 7:16 am
- Location:Next door to my neighbor
- Contact:
Re: Re-wiring the memory card/ rumble motor slot
DO NOT PUT WORDS IN OUR MOUTHS.MODDEDbyME wrote: (people on modretro told me to not post)
We simply stated that we did not want you to bump old topics, after your 3rd/4th bump of a 6 month+ old topic inside one week. We also asked you to stop advertising for MBB.
Cheers,
Basement_Modder
_________________
Basement_Modder
_________________
- Basement_Modder
- Portablizer
- Posts:962
- Joined:Sun Aug 24, 2008 7:16 am
- Location:Next door to my neighbor
- Contact:
Re: Re-wiring the memory card/ rumble motor slot
Well, yes, it is good to read first, but if your problem can't be solved by reading, or you still don't get it, ask away.
Cheers,
Basement_Modder
_________________
Basement_Modder
_________________