3.3v line
Moderator:Moderators
-
- Posts:59
- Joined:Wed Dec 16, 2009 8:06 pm
When wiring up to the 3.3v line from a pth08000 or a pth08080, for the 2k ohm resistor, what's the wattage that the resistor should be?
-
- Posts:59
- Joined:Wed Dec 16, 2009 8:06 pm
Re: 3.3v line
I found a 2.2k ohm 1/8 W resistor at radioshack, would that still work correctly?
- argelfraster
- Posts:984
- Joined:Sun Sep 07, 2008 3:14 pm
- Contact:
Re: 3.3v line
Marshallh just said 1/8 is ok...GamecubePerson111 wrote:I found a 2.2k ohm 1/8 W resistor at radioshack, would that still work correctly?
-
- Posts:59
- Joined:Wed Dec 16, 2009 8:06 pm
Re: 3.3v line
Yeah but I mean on a guide somewhere i read the resistor is supposed to be a 2k ohm resistor, would the difference in ohms still properly work by using a 2.2k ohm resistor?
- argelfraster
- Posts:984
- Joined:Sun Sep 07, 2008 3:14 pm
- Contact:
-
- Posts:59
- Joined:Wed Dec 16, 2009 8:06 pm
Re: 3.3v line
Ok that's all i needed to know, thanks
-
- Posts:59
- Joined:Wed Dec 16, 2009 8:06 pm
Re: 3.3v line
Also will this work fine with the TI regulator?
http://www.radioshack.com/product/index ... Id=2102510" onclick="window.open(this.href);return false;
http://www.radioshack.com/product/index ... Id=2102510" onclick="window.open(this.href);return false;
Re: 3.3v line
If you do two 1k's in series you will get 2k, the ideal value.
Re: 3.3v line
the ideal value is 1,85Bush wrote:If you do two 1k's in series you will get 2k, the ideal value.