N64p Worklog

Includes but not limited to: SNES, Genesis, Sega CD, PlayStation 1, Nintendo 64, Dreamcast, Game Gear and I guess the Virtual Boy.

Moderator: Moderators

Post Reply
User avatar
AdumUp
Posts: 165
Joined: Sun Feb 28, 2010 3:27 pm
360 GamerTag: AdumUp
Steam ID: AdumUp
Location: Louisville, Kentucky

Re: N64p Worklog

Post by AdumUp » Thu Oct 28, 2010 9:07 pm

Raizer04 wrote:BEHOLD MY ENTRY!!

The casework is very nicely done..if i may say so myself...

Seems like you have the speaker portion in the handle of the case.....NICE!

Whats your paint scheme and name looking like for this project?
YOUR ENTRY HAS BEEN BEHELD!!

The paint scheme I want to try and go for is a similar gray to the of the Tomee controller, which is just a slightly darker gray than the official Nintendo controller.
I have no name for n64, so until I can think of one or someone proposes a name that I like, it will remain N64p.
The 64UP is the closest I have come to deciding on so far...
I wasnt able to get any work done today, oh well. Ill try and finish all the cutting and sanding by Saturday. Then to the fun part :? (not yet)
Image

User avatar
AdumUp
Posts: 165
Joined: Sun Feb 28, 2010 3:27 pm
360 GamerTag: AdumUp
Steam ID: AdumUp
Location: Louisville, Kentucky

Re: N64p Worklog

Post by AdumUp » Sun Oct 31, 2010 10:35 pm

I've gotten a bit further on the case. Nothing major, I've been sanding slot of what I already have cut so it looks a bit more clean. I need to trim a little off the n64 motherboard and get a thinner wire for the cartridge slot, 22 gauge is to thick and won't lay very flat. I have Tuesday off this week so ill put in quite a bit of work then. I still need to know how to use two slide switches to turn on/off/charge instead of using a 3 way switch.
Image

User avatar
gamax92
Posts: 289
Joined: Sat Aug 21, 2010 4:06 pm
Location: Inside My Nintendo 64 Ram. (Dont Turn It Off!)
Contact:

Re: N64p Worklog

Post by gamax92 » Thu Nov 04, 2010 6:41 pm

long time since i posted.

You have made some excellent progress.
Bush, i dont like you case work.
I LOVE IT!!! :mrgreen:
I DONT CARE ABOUT POST COUNT.
nevermind1534 wrote:By, I cringe every time I see a post by you, because of the immense number of useless comments that seem to be there for no reason other than to up your post count.
I DONT CARE ABOUT POST COUNT.
#DCE1E5 #ECECEC

User avatar
Bush
Posts: 672
Joined: Fri Jul 16, 2010 2:54 pm

Re: N64p Worklog

Post by Bush » Thu Nov 04, 2010 8:32 pm

Thanks!

User avatar
AdumUp
Posts: 165
Joined: Sun Feb 28, 2010 3:27 pm
360 GamerTag: AdumUp
Steam ID: AdumUp
Location: Louisville, Kentucky

Re: N64p Worklog

Post by AdumUp » Wed Nov 17, 2010 5:32 pm

Sorry i haven't posted in forever, Ive been really busy.

I have managed to get a bit done with the case though. A,B and start are completely finished, as well as L. I'll post pictures as soon as i can get around to it. I'm hoping to get this painted soon.
Image

User avatar
cplexroro
Posts: 84
Joined: Mon Nov 15, 2010 10:25 pm

Re: N64p Worklog

Post by cplexroro » Wed Nov 17, 2010 11:04 pm

Bush wrote:When you seal everything up, you can glue tabs to both sides on the insides and that should do the trick.
damn thats smexy, how much do you charge to do this?
Image

User avatar
Bush
Posts: 672
Joined: Fri Jul 16, 2010 2:54 pm

Re: N64p Worklog

Post by Bush » Thu Nov 18, 2010 4:34 pm

depends, this one cost $40, but I don't wanna advertise in here. PM if you are interested in anything, and I'd be happy to talk prices. :D

User avatar
AdumUp
Posts: 165
Joined: Sun Feb 28, 2010 3:27 pm
360 GamerTag: AdumUp
Steam ID: AdumUp
Location: Louisville, Kentucky

Re: N64p Worklog

Post by AdumUp » Sun Nov 21, 2010 3:13 pm

Decided i would work on the case today... So far D is almost finished and up and down C are both completely finished. I'll cut out left and right C in about an hour. I'm gonna try and get R done too. I'm a bit hesitant about cutting out the holes for the LCD volume and brightness, i don't trust my measuring skills that much :mrgreen:

Later this week I'm going to pick up some spot putty to work out some Dings i made while being careless and to straighten out the sides of the case, their just a bit wavy.

Then Comes the painting :mrgreen: I'll post pictures tonight if i can get around to it.
Image

User avatar
AdumUp
Posts: 165
Joined: Sun Feb 28, 2010 3:27 pm
360 GamerTag: AdumUp
Steam ID: AdumUp
Location: Louisville, Kentucky

Re: N64p Worklog

Post by AdumUp » Sun Nov 21, 2010 10:16 pm

Image

Picture of all the buttons in their places... but not so secured, some are hanging out a bit more then they will in the finished portable, Just a mock up though!
Image

User avatar
Bush
Posts: 672
Joined: Fri Jul 16, 2010 2:54 pm

Re: N64p Worklog

Post by Bush » Sun Nov 21, 2010 11:10 pm

YAY

User avatar
Zeturi
Posts: 224
Joined: Sun Oct 26, 2008 9:07 pm
PSN Username: Zeturi_
Location: California

Re: N64p Worklog

Post by Zeturi » Sun Nov 21, 2010 11:43 pm

Nice lookin' case work there.
If you're getting 404'd when trying to use the links in stickies, try this tutorial to find that juicy info.

User avatar
Bush
Posts: 672
Joined: Fri Jul 16, 2010 2:54 pm

Re: N64p Worklog

Post by Bush » Thu Mar 10, 2011 8:40 pm

Hey, I hate to bump, but any progress at all?

dsv101
Posts: 106
Joined: Tue Feb 01, 2011 5:58 pm
360 GamerTag: Dsv101

Re: N64p Worklog

Post by dsv101 » Fri Mar 11, 2011 8:03 am

dont bump bush, lol

User avatar
Bush
Posts: 672
Joined: Fri Jul 16, 2010 2:54 pm

Re: Re: N64p Worklog

Post by Bush » Fri Mar 11, 2011 5:07 pm

dsv101 wrote:dont bump bush, lol
It was a progress bump and its only been 3 months. I also made the case for this and want to see how it turns out.

dsv101
Posts: 106
Joined: Tue Feb 01, 2011 5:58 pm
360 GamerTag: Dsv101

Re: N64p Worklog

Post by dsv101 » Fri Mar 11, 2011 5:21 pm

i was joking, and i have no business or the right to object a MR or BH member thats been with the site(s) 4 times if not more than me. :)

Post Reply