Includes but not limited to: SNES, Genesis, Sega CD, PlayStation 1, Nintendo 64, Dreamcast, Game Gear and I guess the Virtual Boy.
Moderator:Moderators
-
AdumUp
- Posts:165
- Joined:Sun Feb 28, 2010 3:27 pm
- 360 GamerTag:AdumUp
- Steam ID:AdumUp
- Location:Louisville, Kentucky
Re: N64p Worklog
Post
by AdumUp » Thu Oct 28, 2010 9:07 pm
Raizer04 wrote:BEHOLD MY ENTRY!!
The casework is very nicely done..if i may say so myself...
Seems like you have the speaker portion in the handle of the case.....NICE!
Whats your paint scheme and name looking like for this project?
YOUR ENTRY HAS BEEN BEHELD!!
The paint scheme I want to try and go for is a similar gray to the of the Tomee controller, which is just a slightly darker gray than the official Nintendo controller.
I have no name for n64, so until I can think of one or someone proposes a name that I like, it will remain N64p.
The 64UP is the closest I have come to deciding on so far...
I wasnt able to get any work done today, oh well. Ill try and finish all the cutting and sanding by Saturday. Then to the fun part
(not yet)
-
AdumUp
- Posts:165
- Joined:Sun Feb 28, 2010 3:27 pm
- 360 GamerTag:AdumUp
- Steam ID:AdumUp
- Location:Louisville, Kentucky
Post
by AdumUp » Sun Oct 31, 2010 10:35 pm
I've gotten a bit further on the case. Nothing major, I've been sanding slot of what I already have cut so it looks a bit more clean. I need to trim a little off the n64 motherboard and get a thinner wire for the cartridge slot, 22 gauge is to thick and won't lay very flat. I have Tuesday off this week so ill put in quite a bit of work then. I still need to know how to use two slide switches to turn on/off/charge instead of using a 3 way switch.
-
gamax92
- Posts:289
- Joined:Sat Aug 21, 2010 4:06 pm
- Location:Inside My Nintendo 64 Ram. (Dont Turn It Off!)
-
Contact:
Post
by gamax92 » Thu Nov 04, 2010 6:41 pm
long time since i posted.
You have made some excellent progress.
Bush, i dont like you case work.
I LOVE IT!!!
I DONT CARE ABOUT POST COUNT.
nevermind1534 wrote:By, I cringe every time I see a post by you, because of the immense number of useless comments that seem to be there for no reason other than to up your post count.
I DONT CARE ABOUT POST COUNT.
#DCE1E5 #ECECEC
-
Bush
- Posts:672
- Joined:Fri Jul 16, 2010 2:54 pm
Post
by Bush » Thu Nov 04, 2010 8:32 pm
Thanks!
-
AdumUp
- Posts:165
- Joined:Sun Feb 28, 2010 3:27 pm
- 360 GamerTag:AdumUp
- Steam ID:AdumUp
- Location:Louisville, Kentucky
Post
by AdumUp » Wed Nov 17, 2010 5:32 pm
Sorry i haven't posted in forever, Ive been really busy.
I have managed to get a bit done with the case though. A,B and start are completely finished, as well as L. I'll post pictures as soon as i can get around to it. I'm hoping to get this painted soon.
-
cplexroro
- Posts:84
- Joined:Mon Nov 15, 2010 10:25 pm
Post
by cplexroro » Wed Nov 17, 2010 11:04 pm
Bush wrote:When you seal everything up, you can glue tabs to both sides on the insides and that should do the trick.
damn thats smexy, how much do you charge to do this?
-
Bush
- Posts:672
- Joined:Fri Jul 16, 2010 2:54 pm
Post
by Bush » Thu Nov 18, 2010 4:34 pm
depends, this one cost $40, but I don't wanna advertise in here. PM if you are interested in anything, and I'd be happy to talk prices.
-
AdumUp
- Posts:165
- Joined:Sun Feb 28, 2010 3:27 pm
- 360 GamerTag:AdumUp
- Steam ID:AdumUp
- Location:Louisville, Kentucky
Post
by AdumUp » Sun Nov 21, 2010 3:13 pm
Decided i would work on the case today... So far D is almost finished and up and down C are both completely finished. I'll cut out left and right C in about an hour. I'm gonna try and get R done too. I'm a bit hesitant about cutting out the holes for the LCD volume and brightness, i don't trust my measuring skills that much
Later this week I'm going to pick up some spot putty to work out some Dings i made while being careless and to straighten out the sides of the case, their just a bit wavy.
Then Comes the painting
I'll post pictures tonight if i can get around to it.
-
AdumUp
- Posts:165
- Joined:Sun Feb 28, 2010 3:27 pm
- 360 GamerTag:AdumUp
- Steam ID:AdumUp
- Location:Louisville, Kentucky
Post
by AdumUp » Sun Nov 21, 2010 10:16 pm
Picture of all the buttons in their places... but not so secured, some are hanging out a bit more then they will in the finished portable, Just a mock up though!
-
Bush
- Posts:672
- Joined:Fri Jul 16, 2010 2:54 pm
Post
by Bush » Sun Nov 21, 2010 11:10 pm
YAY
-
Zeturi
- Posts:224
- Joined:Sun Oct 26, 2008 9:07 pm
- PSN Username:Zeturi_
- Location:California
Post
by Zeturi » Sun Nov 21, 2010 11:43 pm
Nice lookin' case work there.
If you're getting 404'd when trying to use the links in stickies, try
this tutorial to find that juicy info.
-
Bush
- Posts:672
- Joined:Fri Jul 16, 2010 2:54 pm
Post
by Bush » Thu Mar 10, 2011 8:40 pm
Hey, I hate to bump, but any progress at all?
-
dsv101 - Posts:106
- Joined:Tue Feb 01, 2011 5:58 pm
- 360 GamerTag:Dsv101
Post
by dsv101 » Fri Mar 11, 2011 8:03 am
dont bump bush, lol
-
Bush
- Posts:672
- Joined:Fri Jul 16, 2010 2:54 pm
Post
by Bush » Fri Mar 11, 2011 5:07 pm
dsv101 wrote:dont bump bush, lol
It was a progress bump and its only been 3 months. I also made the case for this and want to see how it turns out.
-
dsv101 - Posts:106
- Joined:Tue Feb 01, 2011 5:58 pm
- 360 GamerTag:Dsv101
Post
by dsv101 » Fri Mar 11, 2011 5:21 pm
i was joking, and i have no business or the right to object a MR or BH member thats been with the site(s) 4 times if not more than me.