Includes but not limited to: SNES, Genesis, Sega CD, PlayStation 1, Nintendo 64, Dreamcast, Game Gear and I guess the Virtual Boy.
Moderator: Moderators
-
ethan_23
- Posts: 1
- Joined: Sat Apr 24, 2010 8:04 am
Post
by ethan_23 » Sat Apr 24, 2010 8:18 am
Hi, I'm new here buut have seen loads of your works over the net! I'm not really confident enough to try and make a portable machine but I really want to add LEDs and re-paint my N64. I have seen this and want to replicate it:
http://www.meotoo.com/ourtube-showvideo ... _pz0u.html,
however I dont really know how to do it. I saw that he used car paint to get the shiny surface but could anyone give me a really good walkthrough so I could solder the LEDs etc? I have a GCSE and A Level in Electronics so I sort of know what I'm doing when it comes to soldering etc but just need a guide.
Thanks if anyone can help
Heres a picture:

-
mako321
- Posts: 711
- Joined: Mon Aug 10, 2009 6:27 am
Post
by mako321 » Sat May 08, 2010 3:04 pm
Replace the front LED, use a led resistance calculator to figure out what resistance you need for the other LED's at 5v, wire to the 5v pin of the 7805 regulator on the n64?
-
Zeturi
- Posts: 224
- Joined: Sun Oct 26, 2008 9:07 pm
- PSN Username: Zeturi_
- Location: California
Post
by Zeturi » Sat May 08, 2010 4:33 pm
Or you could just wire the leds from the 3.3v power source on one of the controller ports. No regulator required. I would suggest using player 4. Also, Krylon Fusion is your friend for painting plastic.
If you're getting 404'd when trying to use the links in stickies, try
this tutorial to find that juicy info.
-
thewise1
- Portablizer Extraordinaire
- Posts: 1413
- Joined: Sun Jan 04, 2009 8:18 pm
- Location: Sitting on my pile of authentic minnesota dirt
Post
by thewise1 » Sat May 08, 2010 7:56 pm
Get the power from the 3.3v line from the power supply and use a resistor. And use krylon fusion for painting.
-
technoman
- Posts: 19
- Joined: Sat May 08, 2010 4:33 pm
Post
by technoman » Sat May 08, 2010 8:23 pm
use the 3.3 line on the mobo and then for paint krylon fusion with a glossy clear coat
( i need to stop looking so close to picture's

)
never leave you're soldering iron on while cleaning you're room (believe me it hurts)

-
nevermind1534
- Senior Member
- Posts: 1977
- Joined: Fri Feb 06, 2009 1:36 pm
- Steam ID: nevermind1534
- Location: Detroit, MI
-
Contact:
Post
by nevermind1534 » Sat May 08, 2010 9:47 pm
If you want a few resistors quick, I can sell them to you.
Kyo wrote:"does anyone here know how to fly a plane?"
"STAND BACK EVERYBODY, I HAVE A FAKE ID"
-
Basement_Modder
- Portablizer
- Posts: 962
- Joined: Sun Aug 24, 2008 7:16 am
- Location: Next door to my neighbor
-
Contact:
Post
by Basement_Modder » Sun May 09, 2010 4:24 pm
Raizer04 wrote:technoman wrote:use the 3.3 line on the mobo and then for paint krylon fusion with a glossy clear coat
( i need to stop looking so close to picture's

)
Clear coat like Technoman said....it gives it that fresh outta the box...wet look that makes ppl drool like their eating chicken and watermelon on a saturday after going to the mall to get some jordans....
Okay...
Cheers,
Basement_Modder
_________________
-
technoman
- Posts: 19
- Joined: Sat May 08, 2010 4:33 pm
Post
by technoman » Mon May 10, 2010 12:32 pm
Raizer04 wrote:technoman wrote:use the 3.3 line on the mobo and then for paint krylon fusion with a glossy clear coat
( i need to stop looking so close to picture's

)
Clear coat like Technoman said....it gives it that fresh outta the box...wet look that makes ppl drool like their eating chicken and watermelon on a saturday after going to the mall to get some jordans....
lol nice one
never leave you're soldering iron on while cleaning you're room (believe me it hurts)
