QUESTION is there any ware else to input voltage plz HELP!!
Moderator:Moderators
- z2442/joey
- Posts:118
- Joined:Sun Feb 22, 2009 7:47 am
it all seems to be ok but when i was removing the power connecter thing i sorta broke off a little tiny pice of the mother board right below it ware i had all of my wires for the n64 is there any ware else on the board i can put theses inputs for positive 12v ground and 3.3v ???
Re: QUESTION is there any ware else to input voltage plz HELP!!
Look on the bottom of the board. If you still can't figure it out, well, um, I actually don't know.
- z2442/joey
- Posts:118
- Joined:Sun Feb 22, 2009 7:47 am
Re: QUESTION is there any ware else to input voltage plz HELP!!
i am but i relly do not want to fry it
Re: QUESTION is there any ware else to input voltage plz HELP!!
Right at the power switch will be fine. Just be absolutely sure you have everything connected right, and remove the switch. Saves space that way anyway.
- ShockSlayer
- Niblet 64
- Posts:5059
- Joined:Thu Jun 29, 2006 12:47 pm
- Location:In my inbox.
Re: QUESTION is there any ware else to input voltage plz HELP!!
Connect 3.3v to pin 6 and 7.2v to pin 7 underneath the power switch. Also, connect GND to one of the four posts that hold the power switch on.
SS
SS
http://twitter.com/ShockSlayer" onclick="window.open(this.href);return false;
- z2442/joey
- Posts:118
- Joined:Sun Feb 22, 2009 7:47 am
Re: QUESTION is there any ware else to input voltage plz HELP!!
well thanx guy i relly needed the help
- z2442/joey
- Posts:118
- Joined:Sun Feb 22, 2009 7:47 am
Re: QUESTION is there any ware else to input voltage plz HELP!!
sry to double post and yea i fixed it
- ShockSlayer
- Niblet 64
- Posts:5059
- Joined:Thu Jun 29, 2006 12:47 pm
- Location:In my inbox.
Re: QUESTION is there any ware else to input voltage plz HELP!!
Good, hope it goes ell for ya.
SS
SS
http://twitter.com/ShockSlayer" onclick="window.open(this.href);return false;
- z2442/joey
- Posts:118
- Joined:Sun Feb 22, 2009 7:47 am
Re: QUESTION is there any ware else to input voltage plz HELP!!
k every thing is done but the controls and putting it the case so it wont be but a maybe a few days b4 im done my second portable lol