SNES Flash Dev. Cart

Clockwork-Avatar · Post by **Clockwork-Avatar** » Fri Jun 13, 2008 1:04 pm

I don't know if this is the best place to put this, but here it goes:

I know there is a commercially available cart from http://www.tototek.com/ (though they are currently out of stock), but I am looking for info to build my own. I'd like it if at all possible to be flash and not EPROM.

I have info on a cart programmer from http://www.caitsith2.com/snes/snes_cart_dumper.htm, though Its a bit vague and I don't know if I'd actually need a programmer for the AT90S8535.

Any info would be greatly appreciated.

Thanks in advance.

remyar · Post by **remyar** » Fri Jun 13, 2008 2:05 pm

hey hey hey !!!

it's possible to bluid your snes Flash card

i'm french and i build a flash card with flash TSOP memory !!

Build your flash card

and an evolution ( V2 ) of the adaptator

and the last version is in test, no wire in the adaptator !!!!

and the cardrige !!!!

the Cardrige

Turbo Tax 1.0 · Post by **Turbo Tax 1.0** » Fri Jun 13, 2008 3:08 pm

hey remyar you were over on the liquid ninjas board weren't you? I am pretty interested in trying out one of your carts, but I can not find a place to purchase the flash memory. where do you reccomend.

remyar · Post by **remyar** » Sat Jun 14, 2008 12:49 am

hey turbo,

it's kogami on liquid ninja it's a friend.

for the memory,=> digikey normaly!!

Clockwork-Avatar · Post by **Clockwork-Avatar** » Sat Jun 14, 2008 9:38 am

Thanks for the info, and thank god for babel fish ( my French is rusty, as high school was a long time ago), but is there a way to possible make the cart bigger, I'd like to be able to play the Star Ocean decompressed English graphic pack, but I'd need 96 megabits, and if I understand correctly this is only 32, also would I need to buy the Ezo flash programmer or is the Caitsith programmer compatible.

Thanks Again!

remyar · Post by **remyar** » Sat Jun 14, 2008 9:56 am

the new version of the adaptator run on un pcb willem and for the momment, i test tales of symphonia in french with 2 memory ( 64Mbits )

the caitsith it'a a dumper and not a programator !!!

use ezoflash or willem !!!!

Clockwork-Avatar · Post by **Clockwork-Avatar** » Sat Jun 14, 2008 11:38 am

Ahh ok thanks, I didn't realize about the Caitsith thing, thanks. Ill look into an ezoflash or willem

remyar · Post by **remyar** » Tue Jun 17, 2008 2:36 pm

for build an ezoflash see : www.ezoflash.com

remyar · Post by **remyar** » Wed Jun 18, 2008 12:55 pm

hey

i'm realise the adaptator V2.0 ( no wire )

it's good

but it's not possible to program the memori witch a snes connector cartdrige

for reprogramm the memori, unplugged the adaptator and reprogram !!
else, replug the memori in the pcb !!!! and play !!!

remyar · Post by **remyar** » Thu Aug 21, 2008 9:47 am

hello it's me, i'm received the pcb from china !!!

=> it's here => www.ultimate-console.fr

Krepticor · Post by **Krepticor** » Thu Aug 21, 2008 7:13 pm

hmm, any way to gain access to the SA-1 (compresssed info) or the Capcom Grafix chips?

or would this require the actual (expensive) purchase of a dev kit?

zitoun · Post by **zitoun** » Fri Aug 22, 2008 11:43 am

Yooow krepticor , We can't understand exactly what you mean ( Remyar and My self ) because our english is Bad

So .. I try to answer something... ( sorry for the mistakes )

If you want to create a star ocean or Megaman X ( 2or3, the first one use an other tech. ) you have to buy a snes cart who have those chip"s ( SA / capcom grafix )

Our Adaptor is able to create a connection between 29F032 and SNES DIP 36 ( As you have in Illusion of time , secret of mana and many more ... )
Thus , it will be difficult to use this one to made a Star ocean or Megaman x because they use directly SMD technology.

By the way , if you want to build your own Secret of mana 2 in english , LET ME KNOW

( i can Sell some adaptor ) but dont forget that : I live in belgium ( and I dont know the shipping cost )

Peace to all 16 bit's fanatic