Includes but not limited to: SNES, Genesis, Sega CD, PlayStation 1, Nintendo 64, Dreamcast, Game Gear and I guess the Virtual Boy.
Moderator:Moderators
-
bacteria
- Portablizer Extraordinaire
- Posts:3984
- Joined:Fri Apr 20, 2007 12:14 am
- Location:Hampshire, UK
-
Contact:
Post
by bacteria » Tue Aug 19, 2008 6:27 am
Mario wrote:The screws will have a small recess so they sit flush with the case. My question is, will the side plastic hold up to it? (Not crack, etc)
Will be fine, perspex is very tough.
-
Mario
- Posts:1383
- Joined:Mon Mar 05, 2007 7:20 pm
- Location:Sunny California
Post
by Mario » Tue Aug 19, 2008 9:33 pm
Thank you very much! Expect to see a new portable in the next month! (Hopefully)
-
hailrazer
- Portablizer Extraordinaire
- Posts:2764
- Joined:Mon Jul 10, 2006 8:57 pm
- Location:Georgia Sweet Georgia
Post
by hailrazer » Thu Aug 21, 2008 9:05 pm
Hey do you happen to have a wiring diagram for wiring the N64 to the Psone Lcd via RGB.
I want to give it a try but I couldn't find a good diagram anywhere and your link is dead
-
bacteria
- Portablizer Extraordinaire
- Posts:3984
- Joined:Fri Apr 20, 2007 12:14 am
- Location:Hampshire, UK
-
Contact:
Post
by bacteria » Fri Aug 22, 2008 1:24 am
Yup, on my website:
-
hailrazer
- Portablizer Extraordinaire
- Posts:2764
- Joined:Mon Jul 10, 2006 8:57 pm
- Location:Georgia Sweet Georgia
Post
by hailrazer » Fri Aug 22, 2008 6:59 am
bacteria wrote:Yup, on my website:
So all I need is the wire the N64 R, G , B , +5v and ground to the appropriate spots on the Psone Lcd?
I don't need to wire anything else from the N64?
-
bacteria
- Portablizer Extraordinaire
- Posts:3984
- Joined:Fri Apr 20, 2007 12:14 am
- Location:Hampshire, UK
-
Contact:
Post
by bacteria » Fri Aug 22, 2008 7:34 am
You need:
PSone ground > console ground
Rgb in
rGb in
rgB in
C-sync in
+5v
audio left (RGB)
audio right (RGB)
Audio ground
Connect the headphone left, right and switch together unless you are using an audio jack.
-
hailrazer
- Portablizer Extraordinaire
- Posts:2764
- Joined:Mon Jul 10, 2006 8:57 pm
- Location:Georgia Sweet Georgia
Post
by hailrazer » Fri Aug 22, 2008 9:10 am
bacteria wrote:You need:
PSone ground > console ground
Rgb in
rGb in
rgB in
C-sync in
+5v
audio left (RGB)
audio right (RGB)
Audio ground
Connect the headphone left, right and switch together unless you are using an audio jack.
Thanks
One last question. Where does the c-sync come from the N64 ? Just use the S-video C , pin #8 ?