need a replacment C26 component for the snes mini board...

Master of Portables · Post by **Master of Portables** » Fri Sep 08, 2006 8:23 pm

is there any way to get a replacment tiny thing Labled C26 on the snes mini board? or does any one have a dead snes mini board that still has it on there?

MM007 · Post by **MM007** » Fri Sep 08, 2006 8:45 pm

It sounds like just a capacitor. you should be able to get a replacement from radio shack easily enough, if you can still read the values.

Master of Portables · Post by **Master of Portables** » Fri Sep 08, 2006 8:49 pm

oh joy, oh what fun...

how do i do that?

Kurt_ · Post by **Kurt_** » Sat Sep 09, 2006 10:33 am

I have a broken mini, I'l ship you just the component if you're in canada.

Master of Portables · Post by **Master of Portables** » Sun Sep 10, 2006 9:37 am

I am in the US, any way you coul ship it to the US?(I will pay shipping if you want )I woud preferr not just the componet because it is a milimeter thick(tiny)

sammy · Post by **sammy** » Fri Sep 15, 2006 5:18 pm

Just replace it, C36 is definently a capacitor and it's probably gonna cost you only a few cents in you're regular electronics store. No need to order any by mail.

Kurt_ · Post by **Kurt_** » Fri Sep 15, 2006 5:48 pm

Agreed. But nobody knows what its capacity is. I doubt anyone has one of those fancy meters.

Post by **gannon** » Fri Sep 15, 2006 7:23 pm

Let me find my schematics and I'll find the value. It'll take a few days to find my schematic files though, might be better to just try to download them.

Master of Portables · Post by **Master of Portables** » Tue Sep 19, 2006 9:43 am

sammy wrote:Just replace it, C36 is definently a capacitor and it's probably gonna cost you only a few cents in you're regular electronics store. No need to order any by mail.

its c (in bold...) 2 6 !!!!!!!!!!

timmeh87 · Post by **timmeh87** » Tue Sep 19, 2006 12:00 pm

kurt, you dont have to "ship" it, you can just put it in an envelope and mail it. it would cost like a dollar.

anyways, i dont think radio shack sells surface mount capacitors. you might have some trouble putting a normal big one back on there...

does the snes work still? not all the capacitors are necessary

Post by **CronoTriggerfan** » Tue Sep 19, 2006 1:44 pm

timmeh87 wrote:anyways, i dont think radio shack sells surface mount capacitors. you might have some trouble putting a normal big one back on there...

You're right on the first point, although I don't see any problems about a through-hole component not fitting on the board; simply extend the leads so they're not in the way, and have it wrap around the mobo.

CTFan

Master of Portables · Post by **Master of Portables** » Fri Sep 22, 2006 11:51 am

I want to try any thing to make it work, (it took me 2 days to relocate the cart slot the fisti get it to work, I can stuff it into the case and its done:D time, 1 day for the second time...)And I have everything hooked up, one