Includes but not limited to: SNES, Genesis, Sega CD, PlayStation 1, Nintendo 64, Dreamcast, Game Gear and I guess the Virtual Boy.
Moderator:Moderators
-
Link89
- Posts:593
- Joined:Sun Jun 13, 2004 10:23 am
-
Contact:
Noobish Question DPDT switch
Post
by Link89 » Thu Jun 24, 2004 2:12 pm
(Warning noobish question ahead). I'm building an N64 portable and am almost done but don't know how to put on a DPDT switch. Mine has 6 pins (2 rows of 3) on the bottom and I'm not sure where I solder them on and witch pins to use. Any info wouild help.
-
gannon
- Moderator
- Posts:6974
- Joined:Sun Apr 04, 2004 4:48 pm
- Location:Near that one big lake
-
Contact:
Post
by gannon » Thu Jun 24, 2004 3:53 pm
So I suppose you're putting the dpdt switch in for the 3.3V and 12V lines.
---(3.3)
---V V
|=X=X=X=|
|======-|
|=X=X=X=|
---/\ /\
---(12)
It's a horrible picture, but it kinda shows how it is.
-
Link89
- Posts:593
- Joined:Sun Jun 13, 2004 10:23 am
-
Contact:
Post
by Link89 » Thu Jun 24, 2004 4:14 pm
Thanks I get what the picture means but do i also need a toggle switch?
-
gannon
- Moderator
- Posts:6974
- Joined:Sun Apr 04, 2004 4:48 pm
- Location:Near that one big lake
-
Contact:
Post
by gannon » Thu Jun 24, 2004 5:04 pm
No, the dpdt should be fine.
Also, you could use a spst and just use it to turn off the 12v line depending on if you're using a 3.3V regulator or a seperate pack for the 3.3V