i have wired up the RGB wires and the sync wire i do get a pic but
the image is just scroling up all the time.
ben did this mod in his jag portable so dose any one no what i am
not doing right.
RBG a jaguar to ps1 screen question
Moderator:Moderators
-
the doctor
- Posts:2
- Joined:Thu Feb 03, 2011 1:52 pm
so i want to wire up my jaguar to a ps1 screen.
i have wired up the RGB wires and the sync wire i do get a pic but
the image is just scroling up all the time.
ben did this mod in his jag portable so dose any one no what i am
not doing right.
i have wired up the RGB wires and the sync wire i do get a pic but
the image is just scroling up all the time.
ben did this mod in his jag portable so dose any one no what i am
not doing right.
-
low_budget
- Posts:92
- Joined:Tue Mar 30, 2010 3:21 pm
- Location:Hell
Re: RBG a jaguar to ps1 screen question
After looking at the Jaguar AV pinout, it seems it has separate horizontal and vertical sync. I'm not sure if that's for VGA or what. I would forget about those and wire up a LM1881 sync stripper circuit to Jaguar's composite video output pin. Connect the circuit's composite sync output to your PS1 screen.