make a tut on how to write power and screen to yobo
Moderator:Moderators
I'm really confused on how to write screen to yobo car board and how to wire the power for both screen and yobo I have it all wired now but I used like 6 difrent work logs and feel I'm all wrong cuz my power for the screen is on the yobo car board and feel like that is all wrong plus I got my 5vdc for the the battery going to pin 2 on the controller side of the yobo wich is the 11 pin connector side pls help I would be willing to buy some one a drink for there time the paypal
Last edited by localmvp on Thu Jan 20, 2011 11:46 am, edited 1 time in total.
-
- Posts:74
- Joined:Fri Feb 26, 2010 12:51 pm
Re: Can someone make a tut on how to wire psone screen to yobo
you know you have 4 threads right...? (just checking)
Re: Can someone make a tut on how to wire psone screen to yobo
No sorry bout that posted from my phone
-
- Posts:74
- Joined:Fri Feb 26, 2010 12:51 pm
Re: Can someone make a tut on how to wire psone screen to yobo
here this threads got some info in it that should solve your issue
http://forums.benheck.com/viewtopic.php?f=3&t=32977
http://forums.benheck.com/viewtopic.php?f=3&t=32977
Re: Can someone make a tut on how to wire psone screen to yobo
That'd for the retro duo I have the yobo with 3 boards but I made it one board know I'm lost don't really know where to solder the power also if the psone screen is 7.2 and the yobo is 5v don't I need a 7805 to solder it all together I found a pic wich shows the 4 pins wich is video sound left sound right and grn is this wher I get my power from for the whole thing screen and yobo and if 7805 is better where do I solder it too sorry for all the questions I've been beating myself up for about a week
Re: need tut on how to wire yobo power to switch scrern and batt
I would be willing to send 20 bucks to some one who could make a newb friendly guide on how to wire this all I have a psone screen yobo nes that is know one board indeed of three what I don't understand is how to get power to it all I know where to solder the video and controller but that's about it pls help tring to finish before mgc to show it off with my other mods
-
- Posts:74
- Joined:Fri Feb 26, 2010 12:51 pm
Re: make a tut on how to write power and screen to yobo
Last edited by doug104231 on Thu Jan 20, 2011 2:48 pm, edited 1 time in total.
Re: make a tut on how to write power and screen to yobo
Thanks a lot if you pm your email I'll buy you a drink just one more question on the 1 the 4 pins is this were I solder power switch it has ground and 5vdc
-
- Posts:74
- Joined:Fri Feb 26, 2010 12:51 pm
Re: make a tut on how to write power and screen to yobo
well do you want to turn everything off with one switch or do you want to have separate switches for the yobo and screen
Re: make a tut on how to write power and screen to yobo
All in one would be nice thinking of using the power switcg off yobo if possible
-
- Posts:74
- Joined:Fri Feb 26, 2010 12:51 pm