How do you take the controller ports out ?
Just so its a empty shell.
Controller Ports, take out.
Moderator:Moderators
- TomKStones
- Posts:132
- Joined:Sun Jun 13, 2010 5:41 am
- 360 GamerTag:TomKStones
- Location:Australia
Re: Controller Ports, take out.
Regular toaster NES? IIRC you just unscrew the black cover and pull them out after unplugging them from the board, but I haven't done this in awhile and may be wrong.
- eagle5953
- Moderator
- Posts:1892
- Joined:Mon Jul 07, 2008 5:06 pm
- 360 GamerTag:eagle5953
- Steam ID:eagle5953
- Contact:
Re: Controller Ports, take out.
Sounds correct to me.gannon wrote:Regular toaster NES? IIRC you just unscrew the black cover and pull them out after unplugging them from the board, but I haven't done this in awhile and may be wrong.
- TomKStones
- Posts:132
- Joined:Sun Jun 13, 2010 5:41 am
- 360 GamerTag:TomKStones
- Location:Australia
Re: Controller Ports, take out.
So I'd need to un-solder them right?gannon wrote:Regular toaster NES? IIRC you just unscrew the black cover and pull them out after unplugging them from the board, but I haven't done this in awhile and may be wrong.
- WhatULive4
- Posts:329
- Joined:Fri Mar 28, 2008 6:19 pm
- Location:Saskatchewan, Canada
Re: Controller Ports, take out.
No desoldering needed. They are connected to the board with a plug. All you need to do is take a few screws out, and they come right out. I'm curious why you need to know this. It would have only taken a few minutes to pop the top on your console to get these answers.