Controller Ports, take out.

Includes Atari 2600, Nintendo 8-bit, Sega Master System, MSX and more!

Moderator: Moderators

Post Reply
User avatar
TomKStones
Posts: 132
Joined: Sun Jun 13, 2010 5:41 am
360 GamerTag: TomKStones
Location: Australia

Controller Ports, take out.

Post by TomKStones » Sun Jun 13, 2010 5:51 am

How do you take the controller ports out ?
Just so its a empty shell.

User avatar
gannon
Moderator
Posts: 6974
Joined: Sun Apr 04, 2004 4:48 pm
Location: Near that one big lake
Contact:

Re: Controller Ports, take out.

Post by gannon » Sun Jun 13, 2010 7:42 am

Regular toaster NES? IIRC you just unscrew the black cover and pull them out after unplugging them from the board, but I haven't done this in awhile and may be wrong.

User avatar
eagle5953
Moderator
Posts: 1892
Joined: Mon Jul 07, 2008 5:06 pm
360 GamerTag: eagle5953
Steam ID: eagle5953
Contact:

Re: Controller Ports, take out.

Post by eagle5953 » Sun Jun 13, 2010 11:05 am

gannon wrote:Regular toaster NES? IIRC you just unscrew the black cover and pull them out after unplugging them from the board, but I haven't done this in awhile and may be wrong.
Sounds correct to me.

User avatar
TomKStones
Posts: 132
Joined: Sun Jun 13, 2010 5:41 am
360 GamerTag: TomKStones
Location: Australia

Re: Controller Ports, take out.

Post by TomKStones » Sun Jun 13, 2010 8:35 pm

gannon wrote:Regular toaster NES? IIRC you just unscrew the black cover and pull them out after unplugging them from the board, but I haven't done this in awhile and may be wrong.
So I'd need to un-solder them right?

User avatar
WhatULive4
Posts: 329
Joined: Fri Mar 28, 2008 6:19 pm
Location: Saskatchewan, Canada

Re: Controller Ports, take out.

Post by WhatULive4 » Sun Jun 13, 2010 9:27 pm

No desoldering needed. They are connected to the board with a plug. All you need to do is take a few screws out, and they come right out. I'm curious why you need to know this. It would have only taken a few minutes to pop the top on your console to get these answers.

Post Reply