SuperJoy 2 Nes Wriring Diagrams

Includes Atari 2600, Nintendo 8-bit, Sega Master System, MSX and more!

Moderator:Moderators

Post Reply
User avatar
davicoro
Posts:53
Joined:Sat Jul 29, 2006 10:44 pm
SuperJoy 2 Nes Wriring Diagrams

Post by davicoro » Sat Feb 03, 2007 1:45 pm

I have tracked the lines from a Family converter and make this diagrams for those that dont know how to... please note that this has not be tested by me but someone that has make this hack can confirm if the diagram is correct. I just have tracked the lines, make the diagrams and decided to post them to help. Use it at your own risk.

This is the orientation(I dont know the pins Numbers)
Image


First put this wires on the inside part(remember the Orientation)
Image


Then complete with the outside part
Image


to get this....
Image

to disable the internal rooms put a switch on that gray line, the switch can be one of those limit switch taken from a cd/dvd rom

this is the concept...
Image


i hope this can be of some kind of help... good luck!

User avatar
gannon
Moderator
Posts:6974
Joined:Sun Apr 04, 2004 4:48 pm
Location:Near that one big lake
Contact:

Post by gannon » Sat Feb 03, 2007 1:50 pm

You shouldn't need the switch, the internals of the NES cart should auto-bridge it.

User avatar
davicoro
Posts:53
Joined:Sat Jul 29, 2006 10:44 pm

Post by davicoro » Sat Feb 03, 2007 2:09 pm

??? thats one that i didn't know!!! did you know the pins that i have to connect??? to update the pics!!! i make it like this cause i see a bens one that put a wire to disable the internal rooms

User avatar
figmentfilm
Posts:68
Joined:Mon Nov 06, 2006 12:08 am

Post by figmentfilm » Mon Feb 05, 2007 7:54 pm

my family converter alone disables the roms. in (15, 16?) that connect on the noac side with your conversion is all that's needed to do so with my connecter (the bee one, sorry, kinda tired to think it all out).
cheers'
figment
Image

User avatar
davicoro
Posts:53
Joined:Sat Jul 29, 2006 10:44 pm

Post by davicoro » Tue Feb 06, 2007 11:23 am

yes... the family converter disable the internal roms... but... the room will be always disable if the FConverter is pluged (whit or whitout nes cartrige)

i just want to know which part of the converter disable/enable the roms

User avatar
frito
Posts:11
Joined:Tue Feb 06, 2007 7:05 pm
Location:sweden

Post by frito » Sun Feb 11, 2007 11:05 am

can i do so whit may superjoy 3? (the hack) :)

Post Reply