Xbox 360 WVI Commission Progress

Discuss LEGAL mods for your game systems, and turning them into portables!

Moderator:Moderators

Post Reply
User avatar
JonathanMC
Posts:145
Joined:Thu Nov 25, 2010 9:14 am
Location:USA
Xbox 360 WVI Commission Progress

Post by JonathanMC » Tue Jun 28, 2011 10:26 am

I am making an Xbox 360 WVI as a commission. I haven't started yet, but I am starting the process of ordering parts.

I will need the following-

Batteries

Charger

PCB

Screen

Xbox 360 controller (Provided by commissioner)

WVI Receiver/Transmitter

7.4V to 3.3V Regulator (PTH08080)

Vacuum Forming Plastic (Does anyone know if this is good?)

"Patriotic Blue" Krylon Paint

Led's-
Blue
Red
Green
Yellow

Hinges (Where can I get good ones?)

Various Wire, Solder, ABS cement, etc.

The commissioner will pay me my first amount this Friday, and then I can start ordering parts.

Cost-
I am getting the screen, battery, PCB, and charger from Zenloc for $100.
$69.99 for the WVI receiver/transmitter.
The regulator will be free, and the small parts to get it to work will be about $5 max.
The plastic will be about $30
The LEDs are $0.05 each. I will get 5 of each color, which will be only $1
I don't know how much a couple of hinges will cost, but they should be that expensive.
I have the rest (wire, solder, tools, vacuum former, etc.)
100+70+5+30+1+(10?)=about $226
Last edited by JonathanMC on Tue Jun 28, 2011 12:45 pm, edited 2 times in total.

lexxion83
Posts:39
Joined:Wed Jun 08, 2011 8:26 pm

Re: Xbox 360 WVI Commission Progress

Post by lexxion83 » Tue Jun 28, 2011 11:57 am

I'm making a WVI but only enclosing screen, receiver and battery. This way I can use original controllers from any console to make it universal. When it comes to wireless AV receiver you want to make sure you get 5.8Ghz or 1.2Ghz because if you use Xbox controller it runs at 2.4Ghz and there is interference with av receiver.

Here is my post about my WVI and you can take a look at my 5.8GHz av transmitter/receiver. It is very small, draws only about 150mA and can run of 7.4V:

http://forums.benheck.com/viewtopic.php?f=23&t=42979

Here is the link where a guy tests the interference with controller at 2.4Ghz:

http://www.youtube.com/watch?v=20Iixv8iJyA

User avatar
JonathanMC
Posts:145
Joined:Thu Nov 25, 2010 9:14 am
Location:USA

Re: Xbox 360 WVI Commission Progress

Post by JonathanMC » Tue Jun 28, 2011 12:19 pm

Wow, thanks. That was very helpful! Good luck on yours.

User avatar
e3c
Posts:214
Joined:Tue Jul 06, 2010 11:51 am

Re: Xbox 360 WVI Commission Progress

Post by e3c » Tue Jul 05, 2011 12:45 am

Bump for you, I am doing a project just like this soon, well one day...
My For Sale Thread

^ Rare Moniter, Many Consoles, And More!

WTB360LABTOP
Posts:56
Joined:Mon May 16, 2011 7:15 pm

Re: Xbox 360 WVI Commission Progress

Post by WTB360LABTOP » Fri Jul 15, 2011 7:34 pm

updates?

User avatar
JonathanMC
Posts:145
Joined:Thu Nov 25, 2010 9:14 am
Location:USA

Re: Xbox 360 WVI Commission Progress

Post by JonathanMC » Fri Jul 15, 2011 9:27 pm

E3c changed his mind. This commission will happen after I finish another small one he wants me to do. I'm waiting for the parts for that one.

Post Reply