Built a breakout box today and it seems to be working fine aside from the digital audio out. I only get sound out of it when the switch is set to VGA, which isn't the way it worked before I busted the cable apart. Did I miss a connection? It works fine when it does work. If I remember correctly there was a wire on the plug going straight from pin 24 to 26, does that seem right?
Thanks
Terry
360 VGA breakout box question
Moderator:Moderators
- ssmith43654
- Posts:235
- Joined:Wed Aug 18, 2010 1:00 am
- 360 GamerTag:ssmith43654
- Location:Scotland
- Contact:
Re: 360 VGA breakout box question
i took apart and rewired my vga cable aswell. Mine didnt work either and then I connected the little optical/digital audio out board and it worked fine. If you can remeber how to connect that, do it and it should work. If not then i may be able to give you pin-outs when i get home (tomorrow). Its strange how it doesn't work without the little audio board, but i had to connect it to make mine work, i think the newer xbox's requite it to be on.
Hope this helped,
Seb Smith
Hope this helped,
Seb Smith
Last edited by ssmith43654 on Wed Jul 13, 2011 3:56 am, edited 1 time in total.
Never Give up; until you succeed...
Please take a look at my blog page, where I have built an xbox 360 Laptop - http://seb3.yolasite.com/sebs-blog.php
Please take a look at my blog page, where I have built an xbox 360 Laptop - http://seb3.yolasite.com/sebs-blog.php
Re: 360 VGA breakout box question
I think I still have it around here somewhere, I'll see if I can find it and give that a shot.
Thanks for the reply
Thanks for the reply