360 VGA breakout box question

Discuss LEGAL mods for your game systems, and turning them into portables!

Moderator: Moderators

Post Reply
TerryG
Posts: 2
Joined: Fri Apr 22, 2011 12:10 am

360 VGA breakout box question

Post by TerryG » Sat Apr 23, 2011 7:23 pm

Built a breakout box today and it seems to be working fine aside from the digital audio out. I only get sound out of it when the switch is set to VGA, which isn't the way it worked before I busted the cable apart. Did I miss a connection? It works fine when it does work. If I remember correctly there was a wire on the plug going straight from pin 24 to 26, does that seem right?

Thanks
Terry

User avatar
ssmith43654
Posts: 235
Joined: Wed Aug 18, 2010 1:00 am
360 GamerTag: ssmith43654
Location: Scotland
Contact:

Re: 360 VGA breakout box question

Post by ssmith43654 » Mon Jul 11, 2011 4:06 pm

i took apart and rewired my vga cable aswell. Mine didnt work either and then I connected the little optical/digital audio out board and it worked fine. If you can remeber how to connect that, do it and it should work. If not then i may be able to give you pin-outs when i get home (tomorrow). Its strange how it doesn't work without the little audio board, but i had to connect it to make mine work, i think the newer xbox's requite it to be on.

Hope this helped,

Seb Smith
Last edited by ssmith43654 on Wed Jul 13, 2011 3:56 am, edited 1 time in total.
Never Give up; until you succeed...

Please take a look at my blog page, where I have built an xbox 360 Laptop - http://seb3.yolasite.com/sebs-blog.php

TerryG
Posts: 2
Joined: Fri Apr 22, 2011 12:10 am

Re: 360 VGA breakout box question

Post by TerryG » Tue Jul 12, 2011 7:59 pm

I think I still have it around here somewhere, I'll see if I can find it and give that a shot.

Thanks for the reply

Post Reply