XBOX 360 Laptop Blog

[ssmith43654]

I have been working on a xbox 360 laptop and I have been putting together a case for it. Here is the link to the blog

http://seb3.yolasite.com/sebs-blog.php" onclick="window.open(this.href);return false;

Lately my xbox 360 jasper has developed the 3 rrod and it is an error code 0022. If you have any suggestions on how to fix it ( I am planning on getting a reball for £49 (70$) please comment on my thread on that subject (you will find it if you view all my posts in my account)

What do you think of my progress?

[IRShifty]

Lookin good, Where did you get the temperature monitor?

[ssmith43654]

I got it from ebay
I will find the link if you want
It came all the way from hong kong and it was about £8

[IRShifty]

Yea, could you please. Thanks

[ssmith43654]

Here is the link for it

http://cgi.ebay.co.uk/5-25-LCD-Control- ... 53e35a5e59" onclick="window.open(this.href);return false;

I took it out of it's housing so that it is only the small circuit board now. It shows the cpu and the sys temp with little temp sensors. It took me about 3-4 days for me to recive this item (bear in mind it came from hong kong)

If you are more interected in this then I can do a short video of it and post it on utube and put the link to it on the thread

Thanks (any ideas on how to fix a 3rrod (tried reflow) I plan on doing a reball - it's a jasper motherboard - got the 0022 error code )

[IRShifty]

Thanks, are you using the cpu side for the cpu and the sys temp side for the gpu? you just hook it into your power and then place the probes where ever correct? And sorry no ideas for the RROD i usually just send them into M$ for replacement ones. I don't have any experience in reflowing or reballing.

[ssmith43654]

Yea thats it - you connect the 2 wires that go into the molex connector to 12volts (I also discovered it works perfectly fine on 5volts aswell)

[ssmith43654]

As of today there has been 155 visitors to my blog, keep this up, thanks!
I have also put a little quiz asking you what you think about my blog - please fill it in
My xbox 360 is going in the post on monday to get reballed as its got the 0022 error.


Thanks again!!!

[ssmith43654]

Thanks for all the views averyone, to my blog (http://seb3.yolasite.com/sebs-blog.php)!!!!

So far I have had 441 visitor from 25 countries!!!!

I am currently working to get the cooling sorted, please go and take a look and see if you can help me.

-Thanks-

[ssmith43654]

Hi

Thanks for all the views to my blog, there is nearly 700 so keep them coming!

Recently I got the 0110 error on my xbox and I have just fixed it, here is a video of me fixing it

http://www.youtube.com/watch?v=s3EQR4pwmHg

Again, thank you to all my viewers, around the world

Seb Smith


(the xbox laptop is nearly finished, and I will be posting more on my blog in the future so keep on checking!)

[ssmith43654]

Hello to all my supporters!

I got a new jasper because my other one died and I have installed it into the laptop and it is working well
Here is the link to the video on youtube of it working: http://www.youtube.com/watch?v=MQFQ1P6jwXc
I am also approaching 1000 visitors! so keep the views coming people, and I hope to finish the project soon!
I need to put the speakers in tommorow and then all I have to get is the friction hinges from mc-master carr in america!

Until then,bye for now

have a nice day

Thanks

Seb Smith

[jdmlight]

If you put those Youtube URLs inside the Youtube forum tags, they'll display inline:

Code: Select all

[yt=(width),(height)]put regular web URL of Youtube video here[/yt]

Also, the latest video has the extraordinarily-lame "this video contained content from WMG, you can't do that mutter mutter" picture rather than the video.

[ssmith43654]

thanks for the advice,

i am uploading a better quality version without music right now in 720p so everybody can watch and enjoy!

[ssmith43654]

Hello everybody!

I have very nearly finished the xbox laptop, all I have to do now is put the cover onto the back of the screen and then it is done! I have fixed on the friction hinges but I had to do a little reinforcement to the screen as the hinges were so strong. I am going to spray paint the back of the screen gloss black with fluorescent green writing saying 'xbox laptop'! Right now I am waiting for a bit epoxy resin to dry on the screen so I can screw the cover on and open it up and test it. The bright green leds look absolutely great when its on, I have put led's behind the rear fans, behind cpu fan, behind 2 front vents, behind eject and sync buttons to light them up and one behind the volume control. Also when I was testing it with the cover on I noticed the temperatures where going up a bit, although I couldn't test it because the temperature monitor wasn't on. I just touched the cpu heatsink and it was quite hot, I could keep my hand on it, but it was hot, I wonder if this is safe? anyway I cant change the cooling system now as it is all put together.

Thanks again, for all of the support for the project and for seeing my blog!

Seb Smith (15yrs old, from scotland in the UK)

seb3@live.co.uk

[ssmith43654]

i have finished the xbox laptop - check out the video i made today of it:

http://www.youtube.com/watch?v=FiWoIMF2HfY

Thanks

Seb Smith