(I'm not exactly new at this, but I don't know my way around the motherboard, either)1. What kind of wires will I need to buy to relocate the power/reset/etc/pretty much all of the buttons? In the tutorial, it seems like Ben has the perfect wires for every part that he needs to possibly attach wires to.
2. He says that from the A/V port, he gets left audio, right audio, composite video, A/V ground, sensor bar positive and sensor bar negative. I understand that the final destination of these will be up into the screen portion /and/ the A/V jacks, but which cords go to which places?
3. I really don't understand barely a single part of the WiFi module part - I may not even screw with that at all if the WiFi will still function without extending the wires.
4. It says that the negative side of the battery holder is ground (I still need a bit of explanation as to what "ground" means in these situations...like in "A/V ground") - how would I go about repositioning the battery holder; it makes it seem as though I can just solder the negative side somewhere onto the board.
5. Connecting the Gamecube controller port - it looks as if the diagram isn't quite right that is shown in part two of the tutorial - if anyone could clear up how to do this (and what wires I need to get!)
6. The whole plugs thing - I don't understand these at all - he put a plug on the end of the A/V/sensor bar things and I don't really understand it, especially if some are going to the A/V jacks for standard TV hookup.
7. The battery/power supply - I pretty much need every single part of this explained.
8. The fan - he said he pulled the power out of a gamecube controller - hoshkoshbugwaah?
I'll probably run across some more questions to ask once I really start this, I'm just trying to dive into this with as much knowledge about what I'll actually be doing as I can get.
Thanks again to anyone that can help me; I'd really appreciate it!
)
Oh your new lol heres a link to the av pin out 
