First Ever ZN-45 WII PORTABLE!!!!........Worklog!
Moderator:Moderators
- andrewdorsey
- Posts:183
- Joined:Mon Dec 01, 2008 2:49 pm
- Location:hmmmmmmm
So anyways, yeah, I am making a portable wii. It will all be housed in a zn45 case. Yes I am the one who failed miserably on my gamecube portable, BUT my skills have inproved and the wii is much easier to portablize!
What I need:
Gamecube controller
6800MAH battery
What I have:
Wii
ZN-45 Case
ps1 screen
MY skills have improved so I am cofident that this project will get finished.
What I need:
Gamecube controller
6800MAH battery
What I have:
Wii
ZN-45 Case
ps1 screen
MY skills have improved so I am cofident that this project will get finished.
Last edited by andrewdorsey on Sun Aug 16, 2009 3:45 pm, edited 1 time in total.
- chainfire95
- Posts:423
- Joined:Thu Jul 30, 2009 11:13 am
- Location:Minnesota
Re: First Ever ZN-45 WII PORTABLE!!!!........Worklog!
Good luck.
A truly wise man can entertain a thought without accepting it. A fool cannot withhold past judgments but instead closes his mine to new possibilities. Someone who wants to innovate simply needs to forget what everyone says isn't possible.
- andrewdorsey
- Posts:183
- Joined:Mon Dec 01, 2008 2:49 pm
- Location:hmmmmmmm
Re: First Ever ZN-45 WII PORTABLE!!!!........Worklog!
Update:
I got my ps1 screen to work with one of my screen boards! Apparently when I attempted to cut my ps1 screen board, I cut of part of the ground. So I just reconnected it and now all I have to do is LED mod the ps1 screen.
I got my ps1 screen to work with one of my screen boards! Apparently when I attempted to cut my ps1 screen board, I cut of part of the ground. So I just reconnected it and now all I have to do is LED mod the ps1 screen.
Last edited by andrewdorsey on Sun Aug 16, 2009 3:47 pm, edited 1 time in total.
- palmertech
- Senior Member
- Posts:3225
- Joined:Sat Feb 02, 2008 1:40 am
- Location:California, land of the homeless and hippies
- Contact:
Re: First Ever ZN-45 WII PORTABLE!!!!........Worklog!
Is everything plugged in? The wii will not boot if certain parts are missing.
And I have checked, making a wii portable in a ZN40 case is possible, but you will need to cut down the side with the gamecube ports so far that you will lose most of the related circuitry. Useful for a small portable, but not if you want to play GC games/use a GC controller.
And I have checked, making a wii portable in a ZN40 case is possible, but you will need to cut down the side with the gamecube ports so far that you will lose most of the related circuitry. Useful for a small portable, but not if you want to play GC games/use a GC controller.
Excellent
- andrewdorsey
- Posts:183
- Joined:Mon Dec 01, 2008 2:49 pm
- Location:hmmmmmmm
Re: First Ever ZN-45 WII PORTABLE!!!!........Worklog!
well, all of the sudden, it decided to start to work! So any way, I know palmertech. I have already trimmed the board a little bit. I trimmed the oposite side of where the gamecube controller ports are, you know that gold part. I only trimmed a little bit so the board would fit in the case, AND IT DOES!!! I have also foud a battery that I am going to save up for. Its 12 volts and 6800MAH. I also have white LED's coming in the mail so I can mod my screen.
- palmertech
- Senior Member
- Posts:3225
- Joined:Sat Feb 02, 2008 1:40 am
- Location:California, land of the homeless and hippies
- Contact:
Re: First Ever ZN-45 WII PORTABLE!!!!........Worklog!
How much of the other side? Any pics?
I did not cut it very far on mine because I knew there were some hidden traces, but I suppose they may be farther off!
I did not cut it very far on mine because I knew there were some hidden traces, but I suppose they may be farther off!
Excellent
- andrewdorsey
- Posts:183
- Joined:Mon Dec 01, 2008 2:49 pm
- Location:hmmmmmmm
Re: First Ever ZN-45 WII PORTABLE!!!!........Worklog!
I dont have my camera right now, hopefully I be able to post pics tomorrow or friday at the latest. I also saw that there were som hidden traces like with the eject button. I only trimmed it like 3/16 of an inch.
- andrewdorsey
- Posts:183
- Joined:Mon Dec 01, 2008 2:49 pm
- Location:hmmmmmmm
Re: First Ever ZN-45 WII PORTABLE!!!!........Worklog!
Well I finally have some PICS!!!!
Front of case (not done with the case yet)
Back of case
Disk Drive
The two holes are for the two ribbon cables that go to the wii disk drive
I plan to have the disk drive external.
Motherboard with disk drive
wii motherboard
Trimmed it a little
Motherboard in the case
motherboard sticks out a little
screen is not fully functional yet and still need to led mod it
screen fits!!!
screen with motherboard
screen hole with screen
Yeah I know I suck at case work, that is because I only have a dremmel with a drill bit and a sander bit.
MORE TO COME!!!!!
Front of case (not done with the case yet)
Back of case
Disk Drive
The two holes are for the two ribbon cables that go to the wii disk drive
I plan to have the disk drive external.
Motherboard with disk drive
wii motherboard
Trimmed it a little
Motherboard in the case
motherboard sticks out a little
screen is not fully functional yet and still need to led mod it
screen fits!!!
screen with motherboard
screen hole with screen
Yeah I know I suck at case work, that is because I only have a dremmel with a drill bit and a sander bit.
MORE TO COME!!!!!
- thewise1
- Portablizer Extraordinaire
- Posts:1413
- Joined:Sun Jan 04, 2009 8:18 pm
- Location:Sitting on my pile of authentic minnesota dirt
Re: First Ever ZN-45 WII PORTABLE!!!!........Worklog!
Actually that's pretty awesome casework. It looks really good.
Re: First Ever ZN-45 WII PORTABLE!!!!........Worklog!
So far so good! I like your work. However, something caught my eye:
What, does the Wii draw less power? Or is it simply the Disk Drive, because the motherboard in the gamecube is smaller, and the Disk Drive can be made smaller.andrewdorsey wrote:the wii is much easier to portablize!
Making stuff with my new beautiful CNC machine!
Would you like a professional looking custom case for your portable? I may be able to help you. Check out this link:
http://forums.benheck.com/viewtopic.php?f=13&t=32724
Would you like a professional looking custom case for your portable? I may be able to help you. Check out this link:
http://forums.benheck.com/viewtopic.php?f=13&t=32724
- andrewdorsey
- Posts:183
- Joined:Mon Dec 01, 2008 2:49 pm
- Location:hmmmmmmm
Re: First Ever ZN-45 WII PORTABLE!!!!........Worklog!
I cut the wii board down even more!
before:
after:
I am going to have a built in controller and a second player port and thats it, no 3rd or 4th player.
I am also going to have a built in memeory card.
MORE PICS!!!
NOW THE MOTHERBOARD FITS COMPLETLEY INSIDE THE CASE!!!
I think I also might replace the heatsing and also add another fan so I wont have any chance of it overheating.
before:
after:
I am going to have a built in controller and a second player port and thats it, no 3rd or 4th player.
I am also going to have a built in memeory card.
MORE PICS!!!
NOW THE MOTHERBOARD FITS COMPLETLEY INSIDE THE CASE!!!
I think I also might replace the heatsing and also add another fan so I wont have any chance of it overheating.
- andrewdorsey
- Posts:183
- Joined:Mon Dec 01, 2008 2:49 pm
- Location:hmmmmmmm
Re: First Ever ZN-45 WII PORTABLE!!!!........Worklog!
64M320N3: That is just my opinion and also the gamecube disk drive is so thick, much thicker than the wii disk drive. Also the gamecube disk drive is so big. Plus, the disk drive on the wii is already basically relocated, and the gamecube disk drive is such a hassle to relocate.
Re: First Ever ZN-45 WII PORTABLE!!!!........Worklog!
Good to know. Thanks.
Making stuff with my new beautiful CNC machine!
Would you like a professional looking custom case for your portable? I may be able to help you. Check out this link:
http://forums.benheck.com/viewtopic.php?f=13&t=32724
Would you like a professional looking custom case for your portable? I may be able to help you. Check out this link:
http://forums.benheck.com/viewtopic.php?f=13&t=32724
- dragonhead
- Posts:952
- Joined:Sun Apr 04, 2004 4:28 pm
- Location:NH, USA
- Contact:
Re: First Ever ZN-45 WII PORTABLE!!!!........Worklog!
turn the disc drive 90°, integrate it, and have it eject a disc out the side of the case
if it wont fit inside, then just turn it 90°
if it wont fit inside, then just turn it 90°
- andrewdorsey
- Posts:183
- Joined:Mon Dec 01, 2008 2:49 pm
- Location:hmmmmmmm
Re: First Ever ZN-45 WII PORTABLE!!!!........Worklog!
Well I have some bad news. The wii wont turn on anymore. When I plug it in, the red light comes on and then when I press the power button, it only turns on for a second and then shuts off. I don't know what to do.
Any help?
Any help?